Description
IS200STAOH2A – Simplex Analog Output Terminal Board is available in stock which ships the same day.
IS200STAOH2A – Simplex Analog Output Terminal Board comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS200STAOH2A – Simplex Analog Output Terminal Board, contact us and we will get back to you within 24 hours.
Excitation Fan Control IS200EHFCH2A is part of the EX2100 series produced by GE. The model is a small circuit board that has three jumpers, JP1, JP2, and JP3. The JP2 and JP3 jumpers are both two-switch jumpers, while the JP1 jumper is a three-switch jumper.
IS200STAOH2A Other names:
PCB board IS200STAOH2A
Interface board IS200STAOH2A
Analog module IS200STAOH2A
Product Description
Model number IS200EHFCH2A is an exciter fan control. This model is carried by AX Control and can also be repaired by our team of specialists. The dimensions of the board are only three inches by two and three-quarter inches which makes it one of the smaller boards in the EX2100 series. The IS200EHFCH2A model has two integrated circuits on the board as well as two factory-drilled holes located on the left and right sides of the board, the holes are labeled as E1 and E2.
There are three plug connectors positioned on the IS200EHFCH2A model’s right side. The plug connectors are indicated as J16, J17, and J18. In descending order the J18 plug connector is a three-plug connector; plug J17 is a four-plug connector, and plug J16 is a two-plug connector。
INSTALLATION:
The STAO and a plastic insulator are mounted in a panel or on a DIN-rail-mounted sheet metal carrier. The STAO plus insulator mount can also be attached to a sheet metal assembly that is bolted directly to a cabinet. Driven equipment can be placed up to 300 meters (984 feet) away from the turbine control cabinet and shouldn’t have a resistance greater than 900. There are two varieties of Euro-block terminal blocks:
An unpluggable mount terminal block with 36 terminals is present on STAOH1.
A permanently installed terminal block with 36 terminals is present on STAOH2.
As seen in the following diagram, the eight analog outputs are attached directly to the terminal block. For the SCOM connection, there are two screws. Typically, shielded twisted pair (#18 AWG) wires are utilized. An external mounting bracket supplied by GE or the client is used by the I/O cable shield termination. The mounting holes E1 and E2 are for the chassis ground screw connection (SCOM). To save cabinet space, DIN-type terminal boards can be stacked vertically on the DIN rail.
OPERATION:
Eight analog control current outputs are supported by STAO. The voltage drop across the current sense resistor in the local loop is detected for each output, and the signal is transmitted back to the I/O processor that regulates the current. Each output’s surge is suppressed and high-frequency noise is reduced by filters close to the signal exit point. The D/A converter and drivers that produce the regulated currents are found in the I/O processor.
Fig 2: STAO Terminal Board
DIAGNOSTICS:
The output current is shown by the voltage drop across a series resistor on the board. A diagnostic alarm (fault) is generated by the I/O processor if either of the two outputs becomes unhealthy.
The I/O controller queries each ID device that each cable connector on the terminal board has to offer. The terminal board serial number, board type, revision number, and the placement of the JR, JS, and JT connectors are all encoded on a read-only chip known as the ID device.
A hardware incompatibility fault is produced when the I/O controller reads this chip and runs across a mismatch.
FREQUENTLY ASKED QUESTIONS
What is GE Mark VIe IS200STAOH2A?
IS200STAOH2A is a Simplex Analog Output Terminal Board developed by General Electric and used in distributed control systems.
Many products have not been listed yet. For more products, please contact the website https://www.weikunfadacai1.com/ Customer service
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
Popular model recommendations：
IS230TSPRH1C
IS200TPROS1CBB IS230TSPRH1C
IS200TPROS1CBB IS230TSPRH1C/MRP680538
IS200TREAH2AED IS230TNEAH2A
IS200TTURH1CFD IS230TNTRH1C
IS200TVBAH2ACC IS230TVBAH2A MRP646218
IS200TVBAH2ACC IS230TVBAH2A
IS230SNCIH6A
IS230SNIDH1A MRP689579
IS230SNRTH2A
BENDER INSULATION EDS 473-12
AUTRONICA KDS-6 ANALOG
ABB DSXS 001 57170001-A-2
ABB DSTD-W150-57160001-AAK
admin –
GE IS200STAOH2A is a simplex analog output terminal board and one of GE’s industrial automation products. This terminal board is mainly used to convert analog signals into formats that other devices or systems can understand, in order to achieve device control and monitoring.
Specifically, the IS200STAOH2A terminal board has the following characteristics:
Simplex analog output: This terminal board can only output unidirectional analog signals, converting control system instructions into analog signals and transmitting them to devices such as actuators or sensors.
Multiple interfaces: The IS200STAOH2A terminal board supports multiple interface types, such as 4-20mA, 0-10V, etc. You can choose the appropriate interface for connection according to your needs.
High precision: This terminal board adopts a high-precision analog circuit design, which can achieve high-precision analog signal output, ensuring the stability and accuracy of the control system.
High reliability: The terminal board adopts high-quality materials and strict production technology, which has high reliability and stability and can ensure long-term stable operation.
Easy to expand and maintain: This terminal board has the characteristic of being easy to expand and maintain, and can be flexibly configured and adjusted according to actual needs.
In summary, GE IS200STAOH2A is a powerful and reliable analog output terminal board suitable for various industrial automation and control system analog signal output requirements.