Description
IS220PVIBH1A – Vibration module in stock, shipped on the same day.
IS220PVIBH1A – Vibration module in unused and rebuilt state.
To receive the best discount on IS220PVIBH1A – Vibration Module, please contact us and we will reply to you within 24 hours.
IS220PVIBH1A Other names:
Input/output module IS220PVIBH1A
IS220PVIBH1A analog module
Control unit IS220PVIBH1A
Product Description
The IS220PVIBH1A model is designed as a vibration monitoring package. The main function of the PVIB package is to provide electrical interface functionality between up to two I/O Ethernet and vibration terminal boards. The main components of this package are the main processor board, as well as sub boards and acquisition boards, which are used in conjunction with most MK VIe distributed I/O packages.
This kit has 13 channels for collecting and reading proximity and vibration information through the following types of sensors:
Speedometer
Earthquake
Proximitor
Accelerometer
The sensor type is used for different channels, for example, the accelerometer is only used for channels one, two, and three. Please note that channels 9, 10, 11, and 12 can only be used to support proxies, while channel 13 can input proximity or keyphase signal types. Please note that the 13 differential inputs on the IS220PVIBH1A kit have a DAC (Digital to Analog Converter) for bias adjustment, which can eliminate the DC content of the signal and better center the A/D (Analog to Digital) input range.
The PVIB I/O package has processor application code, which may contain all the logical code required to allow the package to operate through single or dual Ethernet inputs. When operating through two Ethernet inputs, the network path required to correctly operate the IS220PVIBH1A packet is always active. If any network fails for any reason, it will not cause any type of interference to the operation of I/O packets, but will indicate the fault through the running network connection.
IS220PVIBH1A is a vibration monitor (PVIB) package developed by GE under the Mark VIe control system. The Vibration Monitor (PVIB) package electrically connects one or two I/O Ethernet ports to the TVBA vibration terminal board. This package includes a processor board, a collection board, and a sub board, all of which are common to all Mark VIe distributed I/O packages.
This package uses channels 1 to 8 to read vibration or proximity information from the following sensor types: preamplifiers, integrated output accelerometers (channels 1-3 only), Velomitors, or seismic channels 9 to 12 only support preamplifiers, while channel 13 can input keyphase or proximity signal types.
Dual RJ45 Ethernet ports and 3-pin power input are used to power the battery pack. For frame rates below 100 Hz, PVIB supports dual Ethernet. It supports frame rates of 3.125, 6.25, 12.5, 25, 50, and 100 Hz through Ethernet.
Connect the DC-37 pin connector directly to the matching terminal board connector for output. LED indicator lights are used to display visual diagnosis.
IS220PVIBH1A compatibility
Dual RJ45 Ethernet ports and 3-pin power input are used to power the battery pack. For frame rates below 100 Hz, PVIB supports dual Ethernet. It supports frame rates of 3.125, 6.25, 12.5, 25, 50, and 100 Hz through Ethernet. Connect the DC-37 pin connector directly to the matching terminal board connector for output. LED indicator lights are used to display visual diagnosis.
IS220PVIBH1A installation
Follow the steps to install the package
Fix the terminal board you want to use.
Connect the PVIB I/O package directly to the terminal board connector.
Use bolts near the Ethernet port to mechanically secure the battery pack.
According to the system configuration, connect one or two Ethernet cables. This package can be used with any port. When using dual connections, ENET1 should be connected to the network connected to the R controller.
Insert the side connector and connect the battery pack to the power source.
Use the ToolboxST * application to configure I/O packages as needed.
Check if the N28 power sub board on the TVBA is properly placed in the TVBA connector.
IS220PVIBH1A operation
Processor
The processor board is connected to a collection board suitable for the purpose of I/O packages or modules. When input power is applied, the soft start circuit will increase the available voltage on the processor board. The processor reset has been removed, and the local power supply is turned on in sequence. The CPU runs a self-test program before loading application code specific to I/O packages or module types from flash memory.
Automatic reconfiguration
The automatic reconfiguration function allows operators to exchange I/O packets without manually reconfiguring each packet or module.
After activating the automatic reconfiguration function, when the controller detects that the I/O package is started with a different configuration, the reconfiguration file will be automatically downloaded from the controller to the I/O package.
Vibration monitoring hardware
The Analog Filter Acquisition Board (BAFA) and Analog Processing Sub Board form the PVIB Application Specific Hardware (KAPA).
The signal conditioning is provided by the analog filter acquisition board, which concentrates and amplifies the signal to improve the analog-to-digital resolution.
Firmware for vibration monitoring applications
Position data from the preamplifier, broadband vibration data from the preamplifier, accelerometers with integrated output, tachometers, and seismometers can all be used on channels 1 to 3. The position information from the preamplifier, broadband vibration information from the preamplifier, tachometer, and seismometer can all be found at the following locations: channels 4 to 8. Only location information is broadcasted on channels 9-12. Channel 13 supports both position feedback and keyphase feedback.
IS220PVIBH1A Features
Common mode voltage
Min 5 V dc
Common mode suppression ratio at 50/60 Hz
-50 dB
Size
8.26cm high x 4.19cm wide x 12.1cm deep
Common questions about IS220PVIBH1A
What is the function of IS220PVIBH1A?
IS220PVIBH1A is a Mark VIe vibration monitor I/O package that can be connected to the terminal board in the Mark VIe system.
What is IS220PVIBH1A?
IS220PVIBH1A is a GE Mark VIe series vibration module.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new product and the price is not genuine,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
The new one is for sale, please contact customer service to communicate.
Discounted spot goods:
IS220PDIAH1BE
IS220PDIAH1BE
IS220PDOAH1A
IS220PDOAH1A
IS220PDIIH1B
IS220PDIOH1B
IS220PAICH1A
IS220PPDAH1B
More……
Titus Veneman –
Great – I should definitely pronounce, impressed with your site. I had no trouble navigating through all tabs and related info ended up being truly easy to do to access. I recently found what I hoped for before you know it at all. Reasonably unusual. Is likely to appreciate it for those who add forums or something, site theme . a tones way for your customer to communicate. Nice task.
Irvin Sucharzewski –
excellent post.Ne’er knew this, regards for letting me know.