Description

---

All products on this website are special products, and market prices have been fluctuating,

　　The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　The new one is for sale, please contact customer service to communicate.

---

Product Description

IS200DRTDH1ABA is a circuit board manufactured by General Electric for the company’s Mark VI system. The Mark VI is the last of a series of Speedtronic systems developed and sold by GE, used to control industrial steam and gas turbine systems.https://www.weikunfadacai1.com/

The IS200DRTDH1ABA DIN resistance temperature detector card is one of the various RTD boards that can be used in Mark VI. Other variants include PRTD, TRTD, and SRTD. In many cases, these boards are compatible with each other, but it is worth noting that DRTD circuit boards are not compatible with PRTD boards.

IS200DRTDH1ABA is a small board with only a few components installed on its surface. The board itself is designed for installation into the DIN rail system. The edges of the board are surrounded by DIN brackets, which block both factory made installation holes. The board has a junction box installed on a long side and a D-shell (female) connector located on a relatively long side. The D-shell connector is used to connect cables. The junction box accepts wired inputs. Other circuit board components include over two dozen capacitors and integrated circuits. The board is also marked with multiple codes and barcodes.

All circuit boards are shipped in static sensitive bags or boxes. We recommend using a grounding strap for installation. For more detailed installation assistance, please use original documents such as manuals or datasheets. These are provided by the OEM with the product you initially purchased.

IS200TRTDH1CCC is a printed circuit board manufactured by GE for the Mark VI system. Mark VI is a Speedtronic steam/gas turbine management system with a PC based operator interface and software specifically designed to work with MKVI hardware.

IS200TRTDH1CCC is an RTD input terminal board. The board has two detachable terminal blocks, each with 24 screw connections. These components are disconnected from the circuit board for maintenance purposes. Each RTD input is connected to the terminal block using three wires. This board can accept up to 16 RTD inputs. There are three 37 pin female cable connectors on the other side of the PCB; These are labeled as JA1 and JB1. The cable connects the TRTD board to the VRTD processor. These inputs have noise suppression function, which can prevent high-frequency noise and surges.

All RTD signals on IS200TRTDH1CCC have a ground high-frequency decoupling function at the signal inlet. Due to multiplexing within the I/O processor, the loss of cables or I/O processors will not result in the loss of any RTD signals in the control database.

IS200TRTDH1CCC has 8 channels per terminal board. Its range is 0.3532 to 4.054 V. The maximum lead resistance is 15 Ω, and the maximum bidirectional cable resistance. This board can use RTDs made of platinum (10, 100, and 200 Ω), copper (10 Ω), and nickel (120 Ω).

The board is also marked with multiple codes and barcodes. All circuit boards are shipped in anti-static bags or boxes. We recommend using a grounding strap for installation. For more detailed installation assistance, please use original documents such as manuals or datasheets. These are provided by the original equipment manufacturer with your original purchase. If you purchase in stock before 3pm, we usually ship on the same day from Monday to Friday. If you need expedited transportation or have any other special instructions, please let us know. GE Mark VI IS200DRTDH1ABA is a printed circuit board created by GE for the Mark VI series. This board is part of the GE speedtronic series. IS200TRPGH1BDD – Termination RELAY is available in stock and will be shipped on the same day. IS200TRPGH1BDD – Terminal relay in unused and rebuilt state. To obtain the most favorable price for IS200TRPGH1BDD – Termination Relay,please contact us and we will reply to you within 24 hours. In the SNTP system, computers on the network (referred to as SNTP servers) send periodic timing messages to all Ethernet interfaces on the network that support SNTP. These interfaces synchronize their internal use of this SNTP timing message for timing. If SNTP is used to perform network time synchronization, the timestamp information typically has an accuracy of t10ms between controllers on the same network. By synchronizing the CPU TOD clock with the SNTP server, a consistent time system can be set across multiple servers. Once the CPU TOD clock is synchronized with the SNTP time, all generated EGD switches will use the current value of the CPU TOD as the timestamp. The setting accuracy of the CPU TOD clock is within+2ms of the SNTP timestamp. Enable TOD clock synchronization on the Ethernet module through Advanced User Parameters (AUP), ncpu_ sync。

If you purchase inventory items before 3pm, we usually ship them on Monday to Friday. If you need expedited shipping or have any other special instructions, please let us know.

---

　　Popular model recommendations:

IS200EXHSG3AEC 

IS200TRLYH1D GE