Description
Many products have not yet been launched, please contact us for more products
If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
IS200VATFG1AAAS3 Other names:
Input/output board IS200VATFG1AAAS3
IS200VATFG1AAAS3 analog quantity board
Controller board IS200VATFG1AAAS3
Regarding IS200VATFG1AAAS3
IS200VATFG1AAAS3 is a voltage attenuator feedback board from General Electric, belonging to the Mark VI IS200 series, which can attenuate the AC or DC bridge voltage of innovative series drivers. The board achieves this goal through two identical series precision resistor strings, and input connections (plug-in connectors) are provided at various locations on the strings to accommodate a range of voltages. The control power supply for this model comes from a distributed high-frequency AC power supply. IS200VATFG1AAA board has dielectric isolation; This isolation is located between the VATF high voltage ground plane and the control power supply, with an input of 8000 V rms.
IS200VATFG1AAAS3 is equipped with eight plug-in connectors, two fiber optic transmitter connectors, five TP test points, two plug connectors, and one LED indicator light (PSOK). This board has a transformer, a heat sink component, and several integrated circuits. This board uses electrolytic, ceramic, and polyethylene capacitors. Resistors are those mentioned above, as well as several metal film resistors. The board also has a resistor network array.
When the IS200VATFG1AAAS3 model is in operation, it will accept three-phase AC input voltage. Two of the three phases, specifically the input second and third phases, will be applied to two identical precision resistors to reduce the high voltage to the signal electronic level. The electronic level is related to the first phase. The first phase of the VATF board is directly connected to the high-voltage grounding plane. One of the alternative functions of the VATF board is that it can measure the voltage of two DC rails relative to the DC neutral or midpoint.
Common questions about IS200VATFG1AAAS3
There are two groups of VATF boards, what is the difference between these two groups?
Yes, it is. The difference lies in frequency deviation. This model of G1 board has no frequency deviation; The frequency deviation of G1 group is 1000 kHz. The G2 board is equipped with an additional resistor that can generate a frequency deviation of 2%; The frequency deviation of the board in G2 group is 1020 kHz.
What are the testing points on the VATF board?
There are five testing points on the VATF board. Each test point has a different name and description. The naming convention for TP1 is V1, described as the high voltage common terminal. The naming convention for TP2 is HV-P15, described as positive 15 VDC. The naming convention for TP3 is HV-N 15, described as negative 15 VDC. The naming convention for TP4 is HV-P5, described as positive 5 VDC. The naming convention for the last test point TP5 is HV-ACOM, described as the high voltage simulation common terminal.
All products on this website are special products, and market prices have been fluctuating,
Please refer to the customer service quotation for details, as the product is new and the price is not genuine,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
The new one is for sale, please contact customer service for further communication.
Related product recommendations:
DS200UCPBG6AFB
DS200TCQCG1BJF
DS200DCFBG1BLC
DS200DCFBG2BNC
DS200DCFBG1BNC
DS200DCFBG2BNC
DS200FECBG1A
DS200DDTBG1A
DS200DDTBG1
DS200SHCAG1B
IS200WEORG1A
IS200ESELH1A
IS200AEPGG1AAA
IS200TSVCH2AED
IS200EPMCH1
IS200JPDGH1A
IS200ECTBG1ADE
IS200WETAH1AGC
IS200EXHSG3REC
IS200JPDSG1A
more……
admin –
IS200VATFG1AAAS3 is a voltage attenuator feedback board from General Electric, belonging to the Mark VI IS200 series, which can attenuate the AC or DC bridge voltage of innovative series drivers. The board achieves this goal through two identical series precision resistor strings, and input connections (plug-in connectors) are provided at various locations on the strings to accommodate a range of voltages. The control power supply for this model comes from a distributed high-frequency AC power supply. IS200VATFG1AAA board has dielectric isolation; This isolation is located between the VATF high voltage ground plane and the control power supply, with an input of 8000 V rms.