Description
DS200ADGIH1A – DS200ADGIH1AAA Mark V Auxiliary Interface Board is available in stock which ships the same day
DS200ADGIH1A – DS200ADGIH1AAA Mark V Auxiliary Interface Board comes in UNUSED as well as REBUILT condition
To offer our best deals for DS200ADGIH1A – DS200ADGIH1AAA Mark V Auxiliary Interface Board, contact us and we will get back to you within 24 hours.
DS200ADGIH1AAA Other names:
Controller module DS200ADGIH1AAA
DS200ADGIH1AAA interface board
Input/output module DS200ADGIH1AAA
The DS200ADGIH1AAA product from General Electric was originally manufactured as a printed circuit board for the Mark V turbine control system series, as described in the brief product description above. This DS200ADGIH1AAA printed circuit board (PCB) belongs to the Mark V series, which you may have guessed based on its complete extended series name. This series has a range of specific applications in General Electric’s management and control systems compatible with steam and gas turbine automatic drive components. The Mark V series using this DS200ADGIH1AAA device, although suitable for newly developed turbine control applications, can still be considered outdated overall as it is a traditional GE product line that was discontinued due to outdated feature lines introduced by retailers in the years following its initial release. Although generally outdated, the Mark V was one of the last GE product lines developed, utilizing patented Speedtronic control system technology that first appeared in the Mark I series launched in the mid to late 1960s.
Hardware tips and specifications
As with any product offered by the Mark V Turbo Control System series, the expected functionality of this DS200ADGIH1AAA device is introduced through a range of specialized hardware components and component specifications accepted through its regular Mark V series components. The GE auxiliary interface board DS200ADGIH1AAA has a 40 pin connector, 60 jumpers, and a 6-pin connector. The GE auxiliary interface board DS200ADGIH1AAA is also equipped with multiple testing points. The board is 8 inches wide. DS200ADGIH1AAA is 6 inches long and designed to be installed in the drive cabinet. It has four screws that align with a position on the bracket for installation with screws. As mentioned earlier, this DS200ADGIH1AAA product belongs to the outdated traditional product series. Therefore, there are no large quantities of original printed online instruction manual materials around it. In this case, the DS200ADGIH1AAA functional product number itself can be identified as a good primary source of hardware components and component specification information for the DS200ADGIH1AAA motherboard; Encode specific details in the collection of named functional segments in the design. For example, the DS200ADGIH1AAA functional product number contains detailed information, including the normal Mark V series assembly of this PCB, its conformal coating style, and its triple product revision table (including three seemingly identical A-class product revisions).
The test points in this DS200ADGIH1AAA device component provide a method for testing circuit board circuits. However, only qualified service personnel can test the circuit board. Service personnel must have calibrated and specifically designed testing equipment for this task. The control must be set up correctly, and the probe must be designed to be used with the tester. Place the circuit board on a flat surface and place a protective bag underneath it. In addition, due to the risk of static electricity, DS200ADGIH1AAA circuit board service personnel must always wear wristbands. After correctly installing the wristband, tie one end of the wristband to your wrist and clip the other end onto the metal leg of the workbench or table. It can also be connected to other metal structures. Static electricity is attracted by metal grounding and discharged from the circuit board or your body. Another appropriate step to reduce static electricity accumulation is to avoid walking around while holding the circuit board in hand. Friction during walking can lead to the accumulation of static electricity. This is especially true in cool and dry weather conditions. If you don’t have a wristband, you can also place the static bag containing the circuit board in contact with a metal structure, such as a chair or metal table leg.
Frequently Asked Questions about DS200ADGIH1AAA
What is the size of DS200ADGIH1AAA?
The width of DS200ADGIH1AAA is 8 inches. The length of DS200ADGIH1AAA is 6 inches.
How are the pins on DS200ADGIH1AAA marked?
The pins on DS200ADGIH1AAA are marked as EG1-EG4. On DS200ADGIH1AAA, they are located in square format.
All products on this website are special products, and market prices have been fluctuating,
Please refer to the customer service quotation for details, as the product is new and the price is not genuine,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
The new one is for sale, please contact customer service for further communication.
Related product recommendations:
DS200FSAAG1ABA
DS200SHVMG1AFE
DS200LDCCH1AKA
DS200SI0CG1A6A
DS200SHVMG1AGE
DS200SI0CG1AEA
DS200PCCAG1ACB
IS200JPDSG1A
IS200EXHSG3REC
IS200WETAH1AGC
IS200ECTBG1ADE
more……
Reviews
There are no reviews yet.