Description
Many products have not been listed yet. For more products, please contact us
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
DS200TCDAG2B Other names:
Switch DS200TCDAG2B
Control system module DS200TCDAG2B
Editable controller DS200TCDAG2B
Product Description
The GE Digital I/O Board DS200TCDAG2B features one microprocessor and multiple programmable read only memory (PROM) modules. It also contains 1 block of 10 LEDs and 2 50-pin connectors. The GE Digital I/O Board DS200TCDAG2B also is populated with 8 jumpers and 1 LED that is visible from the side of the board. The 50-pin connectors on the GE Digital I/O Board DS200TCDAG2B transmit signals to the DS200DTBA and the DS200DTBB boards installed in the drive. The 50-pin connectors attach to ribbon cables that are plugged into the DS200TCDAG2B on one end. The other end of the ribbon cable attaches to either the DS200DTBA or the DS200DTBB boards. Before you remove the board to replace it note how the 50-pin ribbon cables are routed in the interior of the drive and maintain that routing when you install the replacement board.
The DS200TCDAG2B is populated with a block of 10 LEDs that are organised in one row. When the board is receiving power and is processing normally, the LEDs flash in a sequence from left to right. It will continue the sequence as long as normal processing continues. If an error or warning is encountered, the LEDs flash in a pattern to represent the error or warning code. When the board is powered on all 10 LEDs are lit simultaneously to test the functionality of the LEDs.
Frequently Asked Questions about DS200TCDAG2B
How many connectors does DS200TCDAG2B have?
DS200TCDAG2B has 7 connectors on the DS200TCDAG2B terminal board and DS200TCDAG2B has 8 hardware jumpers.
How does DS200TCDAG2B carry contact inputs?
DS200TCDAG2B carries contact inputs from the DTBA and DTBB terminal boards through the JR and JQ connectors on DS200TCDAG2B.
Where do the contact outputs on DS200TCDAG2B go?
DS200TCDAG2B’s contact outputs are carried to the TCRA board through connectors JO1 and JO2.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
New for sale, please contact the website( https://www.weikunfadacai1.com/ )Customer service communication.
Recommended warehouse spare parts:
DS200FECBG1A GE
GE DS200DDTBG1A
GE DS200TCQCG1A
GE DS200TBQCG1A
GE DS200TBQCG1ABB
GE DS200DDTBG1A
GE DS200TCPSG1AEE
GE DS200TCQBG1BCB
GE DS200SHCAG1B
GE DS200DDTBG1A
GE IS230SNAIH4A
ABB MEM86-3X192K
VMIVME-2533-000 32-Bit|
Valmet Automation AXT 421907-1B
OKUI ELECTRIC 1040-1
VODAVI GDK-100 DTIB12-24 ISS-4
VODAVI LDK-300 SLIB2E ISS-3
A-B 0165-058-51-R
SAIA PCD3.W310
ABB PCD235B101
Reviews
There are no reviews yet.