Description

Manufacturer: General Electric

Model: F31X304IBDAMG1-006/09

Product Type: Base Drive Card

Product Description

　　F31X304IBDAMG1- Basic Driver Card

F31X304IBDAMG1 is a circuit board component manufactured by General Electric for its universal drive systems, such as DC-300 and AC-300.

F31X304IBDAMG1 is used as the basic driver card. Its auxiliary board identification number is 531X304IBDARG1. It is also marked with codes such as 006/09 and C-ESS. Drill holes at each corner and edge of the board. It also has several grooves on the surface of the cutting board; These are usually traversed by components.

F31X304IBDAMG1 is a component dense board. The card is divided into three parts from left to right, with each part basically repeating the previous part, but slightly different. The board has six radiators spanning across the bottom of the board. It has three transistors. There are six red LED indicator lights; These are located in a single row across the top edge of the circuit board. The board has three vertical pin connectors placed side by side; Each of these connectors has eight pins. The board has an additional two pin connector at its bottom edge and a vertical single pin cable connector at its top edge.

The other components on F31X304IBDAMG1 include over fifty resistor network arrays, twelve jumper switches, six plug-in connectors, and various integrated circuits, diodes, transistors, capacitors, and resistors. For more information on the functionality, purpose, and installation of F31X304IBDAMG1, please refer to the series user guides, manuals, or datasheets. Please follow all recommended handling and safety procedures.

After installing this NTB/3TB terminal board, it will provide a series of functions for the driver. After installation, 531X305NTBANG1 can generate regulated and non regulated power supplies. The rated voltage of a regulated power supply is 5 VDC and 15 VDC, while the rated voltage of a non regulated power supply is 24 VDC or 125 VAC. Encoders with rated voltages of 5 V and 15 V can be configured using onboard jumpers. The board also includes seven relay outputs, which are composed of A-type or C-type outputs. The contact rating inside each relay is 120 VAC. Low level analog I/O can also be scaled using the four potentiometer on the board.

The 531X305NTBANG1 card manufactured by General Electric is used as an NTB/3TB terminal board. This terminal board was developed as a member of the 531X series replacement driver and exciter board. This board provides many interface system functions. The functions of this card include relays and serial outputs, analog I/O, power supply, and encoder. Usage of card boards: Card boards have a wide range of applications, mainly used in food, beverages, beer, medicine, textiles, automotive manufacturing, electronics, hardware and machinery, logistics centers, turnover of goods, shelving of goods, and convenient loading and unloading of goods

　　Popular model recommendations:

531X207LCSAEG1 GE