Description

　Product Description

When installed in the driver, the 531X111PSHABG1 card is used as the motor excitation control and power board. The device was originally manufactured by General Electric for its 531X series replacement board. The cards developed for this series are suitable for installation in many GE branded drives or exciters. After installing the board, it will provide the necessary power supply for the drive. This specific unit is the G1 version of the board, where the AC line MOV is installed on the board itself.

The main function of the 531X111PSHABG1 card is to provide the power required for the operation of the driver. From this card, the driver can draw rated voltages of 5 VDC, 15 VDC, and 24 VDC. A board integrated pulse transformer is also used to provide power to the motor excitation circuit of the driver. This card also has many onboard options to enhance the user experience. There are three built-in relays on the board for executing system control options. Five jumpers are also available for users to adjust and fix feedback and current signals. The board is equipped with three potentiometer. These allow users to calibrate and adjust current and circuit feedback as needed.

Before starting to install the circuit board onto the driver, please check all provided installation parameters. When these guidelines are met, any risk of equipment damage or defects will be reduced. The integrity of the equipment depends on allowing qualified personnel to handle and install these cards. The series manual and equipment data sheet provide instructions on the wiring of the 531X111PSHABG1 power board. The technical support for this board was initially provided by the manufacturer General Electric.

Our trusted sales personnel are happy to help you meet all your automation needs. To receive pricing and other information regarding the 531X111PSHABG1 board or any other components or repairs, please contact our team by phone or email. The 531X305NTBANG1 card manufactured by General Electric is used as an NTB/3TB terminal board. This terminal board was developed as a member of the 531X series replacement driver and exciter board. This board provides many interface system functions. The functions of this card include relays and serial outputs, analog I/O, power supply, and encoder. After installing this NTB/3TB terminal board, it will provide a series of functions for the driver. After installation, 531X305NTBANG1 can generate regulated and non regulated power supplies. The rated voltage of a regulated power supply is 5 VDC and 15 VDC, while the rated voltage of a non regulated power supply is 24 VDC or 125 VAC. Encoders with rated voltages of 5 V and 15 V can be configured using onboard jumpers. The board also includes seven relay outputs, which are composed of A-type or C-type outputs. The contact rating inside each relay is 120 VAC. Low level analog I/O can also be scaled using the four potentiometer on the board. The 531X305NTBANG1 NTB/3TB wiring board contains many installation parameters. Reviewing these guidelines before starting equipment installation will help reduce the risk of circuit board damage. When shipped from AX Control, this card will be wrapped in a protective static electricity reducing plastic bag. After installation begins, please refer to the equipment manual and data sheet for complete guidance on circuit board wiring. The technical support for this terminal board was initially provided by device manufacturer General Electric.

　　Popular model recommendations:

531X300CCHADM5 GE