Description

---

        Many products have not yet been launched, please contact us for more products

　　If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

　　We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

---

　　Technical specifications

Compatible system: RX7i system

Description: Ethernet interface module

Model: IC698CPE020-AA

Series: Rx7i PACsystem

Brand: GE Fanuc

Connector type: 10 Base T/100 Base Tx, RJ 45

Maximum number of IP addresses: one

LAN standards: IEEE 802.2 Logical Link Control Class I, IEEE 802.3 CSMA/CD Media Access Control, 10/100 Mbps

Redundant IP address support: Yes

LED indicator light: MODULE OK LAN ONLINE STATUS 100、LINK P1 100、LINK P2

Working temperature range: 0 ° C to+60 ° C

Serial port (site manager port): RS-232 DCE, 1200-112200 bps. D-connector, 9-pin female socket

Speed: 200 MHz

Voltage: 5 volts DC

Current requirement: 1.2 amperes

　　Functions and Applications

IC698CPE020-AA is an Ethernet interface module produced by GE Fanuc, used to provide high-performance Ethernet communication for the RX7i control system. Its Ethernet processing speed is 200 MHz. The working voltage is power supply+5 VDC, and the maximum current consumption is 1.5 (+5 VDC). IC698ETM001 also provides TCP/IP communication with other GE Intelligent Platforms control systems and hosts, which are equipped with software for Ethernet communication with GE Intelligent Platforms controllers.

The selected features of IC698CPE020-AA include providing complete configuration and programming services, as well as intermittent data exchange through Ethernet Global Data (EGD). This module provides EGD Class 2 functionality or commands as well as Reliable Data Service (RDS) to ensure correct communication of command information. This module is equipped with comprehensive site management, diagnostic tools, and extended connectivity. Full duplex ports provide automatic negotiation of network speed and cross detection through internal network switches.

The redundant IP addressing of IC698CPE020-AA module allows separate IP addresses to be assigned to two Ethernet modules in two different controllers. In addition to the original IP address of each interface, this address is also configured. The Ethernet interface of the activity unit is the only interface that can use redundant IP addresses. Attention: Users must confirm that the gateway IP address has been configured.

The flash memory stores the protocol in the Ethernet interface and can be easily upgraded using the CPU serial port. It can communicate with remote controllers and other nodes through routers. This module is equipped with status LEDs to assist in operation and troubleshooting.

The IC698CPE020-AA Ethernet interface module belongs to the GE Fanuc Versamax series products. It can be used to provide efficient and high-performance Ethernet communication facilities for RX7i series control systems. Some important features of this module include TCP/IP communication services, SRTP client support, extended connectivity with IEEE and Ethernet LAN ports, programming and configuration services, regular data exchange, and EGD level 2 functionality. The IC698CPE020-AA Ethernet interface module is equipped with 5 LED indicator lights to indicate the status of module operation and communication. The communication protocol of the Ethernet interface module is stored in flash memory and can be upgraded through the CPU serial port.

The IC698CPE020-AA Ethernet interface module is equipped with a 200 MHz Ethernet processor speed. The rated operating voltage is 5 volts DC and the current consumption is 1.5 amperes. This module provides comprehensive site management and diagnostic tools that can improve performance and easily troubleshoot issues. Its duplex mode, network speed, and cross detection function are handled by two full duplex RJ-45 connectors. The installation method of the module is rack installation. It allows Ethernet nodes to be connected in a daisy chain manner. The operating temperature range of IC698CPE020-AA  module is 0 to 60 degrees Celsius. It has 2 automatic induction shielded Ethernet ports and an 8-pin female RJ-45 connector. This module can be directly connected to a Base T twisted pair network hub without the need for an external transceiver. It establishes communication with nodes and remote controllers through routers. The weight of the device is approximately 0.34 kilograms.

TheIC698CPE020-AA module is an Ethernet interface module manufactured by GE Fanuc, belonging to the Rx7i PACsystem series. This module provides Ethernet connectivity for the PACSystem RX7i rack, enabling the rack with this module to connect to existing Ethernet networks for data exchange with other controllers in the same network, remote I/O, communication with visualization systems, and communication with third-party software and tools such as databases and enterprise software applications.

This module is equipped with two Ethernet ports that support communication rates of 10/100 Mbps and have automatic sensing capabilities. These ports are designed for physical connection through RJ45 connectors and at least CAT5 cables. They support daisy chain connections, allowing for the formation of linear, star, and ring topologies, and support unique or redundant IP addresses. In addition, the module is equipped with a serial communication port, namely a 9-pin sub D connector, which supports transmission speeds of 1200-112200 bps. This port is mainly used as a site manager port for configuring modules.

TheIC698CPE020-AA module supports multiple communication protocols, such as TCP/IP communication services using Service Request Transfer Protocol (SRTP), SRTP client, MODBUS TCP server, and MODBUS TCP client. In addition, the module also supports time synchronization over Ethernet networks through SNTP time servers.

This module is equipped with multiple LED indicator lights, providing an overview of the current status of the module. These LEDs include MODULE OK, LAN ONLINE, STATION, 100 LINK P1, and 100 LINK P2. This module is equipped with a dedicated microprocessor that enables it to perform processing tasks at a speed of 200 MHz.

Summary

IC698CPE020-AA  is a high-performance Ethernet interface module suitable for industrial automation and control systems that require high-speed and stable data transmission. Its dual Ethernet port design, support for redundant IP addresses, and rich communication protocol support make it an ideal choice for remote I/O, communication with visualization systems, and data exchange between controllers.

---

　　All products on this website are special products, and market prices have been fluctuating,

　　Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　The new one is for sale, please contact customer service for further communication.

---

IC697CBL700
IC693CPU363LT
IC693CPU372-AE
IC690RFH008
IC693ACC323B
IC693ALG221
IC693APU300K
IC693APU301
IC693CHS391
IC693CHS392
more……