IC698ETM001-EL GE Rx7i Ethernet module

Sale!

IC698ETM001-EL GE Rx7i Ethernet module

¥4,454.00

Description


  Many products have not yet been launched, please contact us for more products

  If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

  We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.


  IC698ETM001-EL Other names:

PLC module IC698ETM001-EL

IC698ETM001-EL Communication Module

Analog module IC698ETM001-EL

  Product Description

IC698ETM001-EL is an Ethernet interface module produced by GE Fanuc, used to provide high-performance Ethernet communication for the RX7i control system. Its Ethernet processing speed is 200 MHz. The working voltage is power supply+5 VDC, and the maximum current consumption is 1.5 (+5 VDC). IC698ETM001-EL also provides TCP/IP communication with other GE Intelligent Platforms control systems and hosts, which are equipped with software for Ethernet communication with GE Intelligent Platforms controllers.IC698CPE020-CC

The selected features of IC698ETM001-EL include providing complete configuration and programming services, as well as intermittent data exchange through Ethernet Global Data (EGD). This module provides EGD Class 2 functionality or commands as well as Reliable Data Service (RDS) to ensure correct communication of command information. This module is equipped with comprehensive site management, diagnostic tools, and extended connectivity. Full duplex ports provide automatic negotiation of network speed and cross detection through internal network switches.

The redundant IP addressing of IC698ETM001-EL module allows separate IP addresses to be assigned to two Ethernet modules in two different controllers. In addition to the original IP address of each interface, this address is also configured. The Ethernet interface of the activity unit is the only interface that can use redundant IP addresses. Attention: Users must confirm that the gateway IP address has been configured.

The flash memory stores the protocol in the Ethernet interface and can be easily upgraded using the CPU serial port. It can communicate with remote controllers and other nodes through routers. This module is equipped with status LEDs to assist in operation and troubleshooting.

The IC698ETM001-EL Ethernet interface module belongs to the GE Fanuc Versamax series products. It can be used to provide efficient and high-performance Ethernet communication facilities for RX7i series control systems. Some important features of this module include TCP/IP communication services, SRTP client support, extended connectivity with IEEE and Ethernet LAN ports, programming and configuration services, regular data exchange, and EGD level 2 functionality. The IC698ETM001-EL Ethernet interface module is equipped with 5 LED indicator lights to indicate the status of module operation and communication. The communication protocol of the Ethernet interface module is stored in flash memory and can be upgraded through the CPU serial port.IC698CPE020-CC(1)

The IC698ETM001-EL Ethernet interface module is equipped with a 200 MHz Ethernet processor speed. The rated operating voltage is 5 volts DC and the current consumption is 1.5 amperes. This module provides comprehensive site management and diagnostic tools that can improve performance and easily troubleshoot issues. Its duplex mode, network speed, and cross detection function are handled by two full duplex RJ-45 connectors. The installation method of the module is rack installation. It allows Ethernet nodes to be connected in a daisy chain manner. The operating temperature range of IC698ETM001-EL module is 0 to 60 degrees Celsius. It has 2 automatic induction shielded Ethernet ports and an 8-pin female RJ-45 connector. This module can be directly connected to a Base T twisted pair network hub without the need for an external transceiver. It establishes communication with nodes and remote controllers through routers. The weight of the device is approximately 0.34 kilograms.


  All products on this website are special products, and market prices have been fluctuating,

  Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

  Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

  The new one is for sale, please contact customer service for further communication.


Recommended models:
IC697CBL700
IC693CPU363LT
IC693CPU372-AE
IC690RFH008
IC693ACC323B
IC693ALG221
IC693APU300K
IC693APU301
IC693CHS391
IC693CHS392
more……

Reviews

There are no reviews yet.

Be the first to review “IC698ETM001-EL GE Rx7i Ethernet module”

Your email address will not be published. Required fields are marked *