Description

---

         IC693PCM311 – – Programmable Coprocessor Module of the GE Fanuc series 90-30 PLCs is available in stock which ships the same day.

　　IC693PCM311 – – Programmable Coprocessor Module of the GE Fanuc series 90-30 PLCs comes in UNUSED as well as REBUILT condition.

　　To avail our best deals for IC693PCM311 – – Programmable Coprocessor Module of the GE Fanuc series 90-30 PLCs, contact us and we will get back to you within 24 hours.

---

　　IC693PCM311 Other names:

Controller IC693PCM311

IC693PCM311 Aoutput module

Communication module IC693PCM311

---

Brand	GE Fanuc	Series	Series 90-30
Replacement Battery	IC693ACC301 (pkg of 2)	Communication Protocols supported	Modbus RTU and GE Fanuc CCM
Battery Backed RAM	640 K	Part Number	IC693PCM311

---

　About IC693PCM311

The IC693PCM311 is a GE Fanuc type 90-30 PLC Programmable Coprocessor Module. It has a total capacity of 640K, with 190K available for MegaBasic programs. Boards having an embedded CPU series 311, 313, or 323 will not function with the module. MegaBasic and C are both supported. With GE Fanuc Software, it may also be used as an RTU Master. When installing the CPU module, do not utilize slot 1 (the main CPU slot). Expansion and Remote Because baseplates lack additional CPU slots, the IC693PCM311 Programmable Coprocessor Module cannot be used.

The module has two modes of operation: program and run. By pressing the restart button, you can switch between modes. There are three indicator LEDs and two ports on the module. The first LED, which remains lit, indicates that the module is operational.

The two remaining LEDs, by default, display the status of the two ports, although they can be changed by the user. The battery has the product number IC693PCM311 and is mounted to the faceplate of the module using a battery attaching clip.

When using the module for the first time, the user must connect it in and unplug it if the module will be stored for an extended period of time. IC693PCM311 wires must be attached to the PCM ports on the front of the Module in order to use them.

 

GE Fanuc IC693PCM311 Programmable Coprocessor Module (PCM) adds 2 serial connection ports and a total of 640K of memory to the factory settings of a GE Fanuc Series 90-30 PLC. It is easy to install in any of the slots available on a Series 90-30 baseplate except the first one, which is reserved for the system power supply.

GE Fanuc designs and manufactures several types of Programmable Coprocessor Modules (PCMs), and one of them is the IC693PCM311 PCM which is an additional serial communication card for the GE Fanuc Series 90-30 PLCs which enables the users to connect peripheral devices such as industrial printers, barcode readers, personal computers or programming interfaces to the PLC. It is designed with a total available memory capacity of 640K and a dedicated MegaBasic memory capacity of 190K. On the front of the IC693PCM311 Programmable Coprocessor Module Card’s faceplate, there are 3 LEDs. One of them shows the working status of the module (on or off), and the other 2 show the status of each of the ports, but they can be configured by the users to indicate another variables as well. Both the MegaBasic and the C programming languages are supported by the PCM.

With the GE IC693PCM311 Programmable Coprocessor Module Card, the programmable logic controllers are able to receive signals coming from any imaginable device as long as they are sent by using a serial communication protocol. It is up to the users to configure the device in order to get the most out of this powerful coprocessing tool. The installation process of the IC693PCM311 Programmable Coprocessor Module Card simply consists of inserting the card into any of the slots available on a GE Fanuc Series 90-30 PLC chassis. The only slot that is not usable for connection of this module is the first one on the left side of the chassis because that slot is reserved for the installation of the system’s power supply. Only properly trained technicians should perform any servicing or installation work on the module.

---

　　FREQUENTLY ASKED QUESTIONS

　　What is GE Fanuc IC693PCM311?

　　IC693PCM311 is a programmable coprocessor module with GE Fanuc 90-30 series. This module is a high-performance microcomputer used as a coprocessor in the Series 90 PLC system.

　　How many slots does IC693PCM311 occupy?

　　In the Series 90 rack, each IC693PCM311 only occupies one slot.

　　How to view the price and availability of IC693PCM311?

　　Please call+86 18030177759 for sales or request a quote.

         IC693PCM311- The programmable coprocessor module of the GE Fanuc 90-30 PLC series is available in stock and will be shipped on the same day.

　　IC693PCM311- The programmable coprocessor module of the GE Fanuc 90-30 PLC series is in an unused and rebuilt state.

---

　　All products on this website are special products, and market prices have been fluctuating,

　　The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　New for sale, please contact the website https://www.weikunfadacai1.com/ Customer service communication.

---

　　Popular model recommendations:
IC693CPU372-AE
IC693ACC323B
IC693ALG22
IC693APU300K
IC693APU301
IC693CHS391
IC693CHS392
IC693CHS398
IC693CMM321