Description

Allen Bradley servo controller 1394C-AM03 is a servo (shaft) amplifier with filtering (EMI) and enhanced termination functions, rated output of 2 kW, DC input voltage of 530-680, and current of 3.2 A. It is a C-series system module with intelligent power supply, EMI filtering, and improved termination that can support four axes and serve as a speed or torque controller. It is equipped with the Bulletin 1201 human-machine interface module, which can achieve automatic adjustment and quick startup. Function. A SCANport interface with a continuous output current of 33.8 amperes and a continuous output power of 22 kilowatts under DC voltage, three-phase power supply. 1394C-SJT22-A has power inputs such as a 24V AC power supply, disconnect function, fuse box, and a 24V DC power supply for motor brakes and thermal contacts.

The working voltage of 1394C-SJT22-A is 324 to 528 VAC, with a frequency of 50 to 60 Hz and an efficiency of 98%. The capacitance of 1394C-SJT22-A is 660 µ F and the inductance is 500 µ H, requiring an external shunt module. 1394C-SJT22-A has diagnostic functions, including current monitor, thermal overload detection, and feedback signal monitor. In addition, it also has status LEDs for the system and axis modules. Electrical noise protection and improved grounding terminals are also included. IC697PWR748 is a 90W 48 VDC power module from GE Fanuc’s 90-70 series. It has three output voltages (up to 18 amperes at+5 VDC, up to 1.5 amperes at+12 VDC, and up to 1 ampere at -12 VDC), totaling 90 watts. This module has a sliding in rack mounting structure and two rack operations through a single power supply. This power supply is equipped with electronic short circuit overcurrent protection provided on the 5 volt bus.

　　features:

Supports standard GMC, GMC Turbo, CNC interface, SERCOS, and analog servo configurations

Digital regulation speed and current loop compensation

Highly integrated surface mount circuits

DSP assisted processing

The Rockwell/Allen Bradley 1394 digital AC multi axis motion control system is a modular series of multi axis motion control and drive systems. 1394 can be used as an integrated motion controller and drive system (GMC) with Turbo or standard IMC S Class Compact function, an integrated 9/440 CNC system, a 9/series CNC digital interface drive system, a SERCOS servo drive system or an analog servo drive system. These systems provide direct line connection, efficient IGBT power conversion, and sliding locking, module to module connection systems for 360 and 480V three-phase input power supplies. Each module can be configured with up to 4 axis modules, each connected to a motor. 1394 provides significant interconnect savings and panel space.

　　Popular models in the same series:

A-B 1394C-SJT22-A