Description
Many products have not yet been launched, please contact us for more products
If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
A6500-RC Other names:
General Monitoring Module A6500-RC
A6500-RC Dual Channel Card
Mechanical Health ™ System A6500-RC
The A6500-RC Universal Measurement Card is a multifunctional component of the Emerson AMS 6500 Asset Management System (AMS), designed specifically for integration into the AMS 6500 ATG mechanical protection system. This card is capable of processing various input signals, including eddy currents and raw signals, and is a valuable asset for mechanical health monitoring and protection. This card can handle various sensor inputs, making it suitable for various types of mechanical health monitoring applications.
Overview
The A6500-RC universal measurement card is designed specifically for industrial applications and can provide precise mechanical protection monitoring functions. It is equipped with advanced sensor interfaces and communication capabilities, capable of efficiently processing data from various sensors and converting it into usable information to support device status monitoring and fault prevention.
Main characteristics
Sensor input channel:
The A6500-RC universal measurement card is equipped with 2 sensor input channels, which can be used independently or in combination, depending on the selected measurement mode.
The supported sensor types include eddy current, piezoelectric (accelerometer or speedometer), seismic (electrodynamic), LF (low-frequency bearing vibration), Hall effect, and LVDT (used in combination with A6500-LC).
Digital Input/Output:
The card also includes 5 digital inputs and 6 digital outputs, providing rich control and communication interfaces for the system.
Communication ability:
The measurement signal is transmitted to the A6500-CC communication card through the internal RS 485 bus and converted to Modbus RTU and Modbus TCP/IP protocols for further transmission to the host or analysis system.
The communication card also provides a communication interface through a USB socket on the panel for connecting to a PC/laptop to configure the card and visualize measurement results.
Analog output:
The measurement results can be output through analog outputs (0/4-20mA), which have a common ground and are electrically isolated from the system power supply.
Cabinet space and compatibility:
The A6500-RC universal measurement card is a dual channel, 3U size, 1-slot plug-in module, which reduces cabinet space requirements by half compared to traditional four channel 6U cards.
Compliant with API 670 standard, supports hot swappable modules for easy maintenance and upgrades.
Self checking and monitoring functions:
Provides comprehensive self checking functions, including monitoring hardware, power input, hardware temperature, sensors, and cables.
These features help ensure the stable operation of the measurement card and promptly identify potential issues.
Sensor compatibility: A6500-RC supports multiple sensor types, including eddy current, piezoelectric (accelerometer or speedometer), seismic (electric), low-frequency bearing vibration, Hall effect, LVDT (when used with A6500-LC), and dynamic pressure sensors. This broad compatibility ensures flexibility in monitoring different parameters across various types of machinery.
Digital input and output: This card has 5 digital inputs and 6 digital outputs, which can realize complex logical operations and control sequences according to monitoring conditions.
Communication protocol: The signals of A6500-RC are transmitted to the A6500-CC communication card through the internal RS 485 bus, and then the card converts these signals into Modbus RTU and Modbus TCP/IP protocols for interaction with the host or analysis system. In addition, the card also supports USB connection, which can be directly connected to a PC/laptop, simplifying setup and configuration.
Analog output: This card provides analog output (0/4-20 mA) for transmitting measurement values to other systems or devices, enhancing its versatility in different monitoring settings.
Supported functions: A6500-RC can monitor shaft vibration, casing vibration, position, speed, buttons, pressure, etc., providing comprehensive mechanical health monitoring functions.
Technical specifications:
Size: The card is designed as a 2-channel, 3U size, 1-slot plugin that can be seamlessly installed into the A6500-xR system rack.
Pulse output: includes 2 normally open photoelectrochemical coupled collector emitter outputs, with polarity reversal protection, voltage capability of 19 V to 32 V DC, and maximum load of 30 mA.
Raw signal output: Each sensor input provides an output that is non reactive and short-circuit resistant, maintaining accuracy within ± 1% of full scale within the operating temperature range of -20 ° C to+70 ° C.
Main specifications:
Eddy current input signal and raw signal processing:
Voltage range: -1V to -22V
Frequency range: 0 Hz to 18750 Hz
Power supply voltage: The maximum power supply voltage is -23.25 V/-26.0 V DC
Power load: The maximum power load is 35 mA
Power supply accuracy: ± 1%
Power load variation: ± 1%
Power supply temperature drift: ± 1% attenuation, within the operating temperature range of -20 ° C to+70 ° C, for loads from 0 to 100%,<0.1 dB optional short-circuit protection.
Input signal and raw signal:
Voltage range:+1V to+23V
Frequency range: 0 Hz to 18750 Hz
Attenuation:<0.1 dB
Supply:
Constant current: 0 mA to 8 mA, adjustable
Optional connection: 2-wire or 4-wire
Power gain accuracy: ± 3.5%
Power imbalance accuracy:+100 µ A/-0 µ A
Power supply voltage reserve:+25 V
Power supply temperature drift: ± 50 µ A within the operating temperature range of -20 ° C to+70 ° C.
Integration and usage:
The A6500-RC universal measurement card is a component of the AMS 6500 system, providing a unified platform for mechanical health monitoring. Enhance its ability to monitor and protect machinery under various conditions. It supports a wide range of voltages and frequencies, making it suitable for various sensors and transducers commonly used in industrial machinery health monitoring. It can connect with various sensors and communicate using standard protocols, making it a core component of modern industrial machinery protection and asset management strategies.
Application scenarios
The A6500-RC universal measurement card is widely used in various industrial scenarios that require mechanical protection monitoring, such as power plants, the oil and gas industry, manufacturing, etc. It can help enterprises monitor key parameters such as vibration and displacement of equipment in real time, prevent equipment failures and downtime events, and improve production efficiency and equipment reliability.
Summary
A6500-RC Universal Measurement Card is a powerful and stable mechanical protection monitoring device. Featuring extensive sensor compatibility, flexible communication options, and comprehensive monitoring capabilities. Its integration with the AMS 6500 system improves the overall efficiency of mechanical protection and condition monitoring work. It provides a reliable solution for industrial applications with advanced sensor interfaces, communication capabilities, and self checking functions. Whether in terms of monitoring accuracy, communication efficiency, or maintenance convenience, the A6500-RC universal measurement card is a product worth recommending.
All products on this website are special products, and market prices have been fluctuating,
Please refer to the customer service quotation for details, as the product is new and the price is not genuine,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
The new one is for sale, please contact customer service for further communication.
Related product recommendations:
9199-00002 A6120
A6110 9199-00001
A6140 9199-00058
A6312/06
A6110 9199-00001
A6140 9199-00058
A6370D
A6740
A6824 9199-00090
A6824R 9199-00098-13
A6120
9199-00002 A6120
A6500-UM
MMS6210
MMS6220
more……
admin –
The A6500-RC universal measurement card is designed specifically for industrial applications and can provide precise mechanical protection monitoring functions. It is equipped with advanced sensor interfaces and communication capabilities, capable of efficiently processing data from various sensors and converting it into usable information to support device status monitoring and fault prevention.