Description

Description: The AN-X2-AB-DHRIO is an Ethernet /IP to Allen-Bradley Remote I/O / Data Highway Plus (DH+) gateway module that is manufactured by Prosoft Technology. This module allows ControlLogix or CompactLogix controllers that utilizes Ethernet / IP communication to communicate with PLC, SLC 500, PanelView, Drives and Flex I/O adapter modules that are capable of Remote I/O (RIO) or Data Highway Plus (DH+) communication protocol. This module provides has 1 RJ45 10/100 Mbps Ethernet port and Two (2) 3-pin phoenix connector for power supplyand DH+ / RIO network connectionWhat is the function of the controllerin the CPUThe controller is the command andcontrol center of the entire CPU, whichconsists of the instruction register (IR),program counterThe PC (ProgramCounter) and OperationsController 0C (OperationController) arecomposed of three components, whichcoordinate the orderly operation of theentire computerWork is extremely important. Below aresome relevant introductions organized by theeditor for everyone, hoping to be helpful!A brief introduction to the functions of

the controller in the CPU

Features and Benefits　　Migration Specifications　　DCSNet2　　In the DCSNet2 operating mode, the gateway acts as a bridge between Ethernet/IP and a Reliance AutoMax DCSNet network. The AN-X removes the hardware dependence on specific AutoMax interface cards (ISA, PCI, PC Card) allowing any computer or PAC with Ethernet/IP to connect to a DCSNet network.　　DCSNet Master or Slave　　Supports Reliance AutoMax programming software

Supports up to 15 scheduled connections to a ControlLogix processor, DCSNet2　　Supports EtherNet/IP HMIs to AutoMax controllers　　AMXRIO　　In the AMXRIO operating mode, a PC or PAC on Ethernet /IP can connect to a Reliance AutoMax Remote I/O network. The module acts as a master on the AutoMax remote I/O network.　　Scan up to 7 slave drops　　Supports up to 248 words of scheduled output data and up to 250 words of scheduled input data　　Scans AutoMax remote I/O racks and heads　　Maintains diagnostic counters　　Troubleshooting Specifications　　DCSLO　　In the DCSLOG operating mode, the gateway connects to the AutoMax DCSNet network, listens to every value of each DCSNet　　register, looks for changes and then timestamps the values.　　Data logging with millisecond time stamps　　Does not occupy a drop on the network or affect existing network traffic　　AMXCAPT　　In the AMXCAPT operating mode, data can be captured, stored and then analyzed on a Reliance AutoMax DCS or Remote I/O network. Examine the behavior of all drops, verify network data and timing, locate network errors and troubleshoot problems with the network and with the process.　　All network frames are captured and stored, with timestamps to microsecond precision　　Post-capture filtering process to select frames of interest for further analysis　　Typical capture file size is 2.5 mb/minute, 150 mb/hour, 3.6 gb /day

　　Model recommendation:

PROSOFT ANC-100E AN-X2-AB-DHRIO