ENTERASYS A4H254-8F8T P0973JP

Sale!

ENTERASYS A4H254-8F8T P0973JP

¥321.00

Description

Features Stack Connections The switches have front panel RJ45 ports for connections in a stack configuration. The stacking cables used for the connections must be standard Category 5 or better UTP cable. Redundant Power Supply Capability The A4 has power supply redundancy capability when connected to an optional external redundant power supply: • STK‐RPS‐150PS, a 150 watt DC power supply for redundant power for A4 switches. If the internal power supply fails, the RPS automatically assumes the role of the internal power supply without interrupting network traffic. The internal power supply and RPS each have their own AC power connection, which enables the connection of each power supply to a different AC power circuit for additional AC power source redundancy. Management Management of the switch can be either in‐band or out‐of‐band. In‐band remote management is possible using Telnet, Enterasys Networks’ NetSight® management application, or the WebView application. Out‐of‐band management is provided through the DB9 Console port connector on the front panel using a VT100 terminal or a VT100 terminal emulator. Switch Configuration Using WebView Enterasys Networks’ HTTP‐based Web management application (WebView) is an intuitive web tool for simple management tasks. Switch Configuration Using CLI Commands The CLI commands enable you to perform more complete stackable switch configuration management tasks. For CLI command set information and how to configure the module, refer to the Enterasys A4 CLI Reference.5. Proceed to “Guidelines for Flat Surface Installation” on page 2‐3. For a rackmount installation, proceed to “Rack Mounting the Switch” on page 2‐3. Guidelines for Flat Surface Installation Locate the switch within 182.88 cm (6 ft) of its power source and on a surface as shown in Figure 2‐1 on page 2‐3. If an optional redundant power system is going to be installed and connected to the 14‐pin Redundant Power Supply input connector on the rear of the switch, refer to “Installing and Connecting a Redundant Power System” on page 2‐10. If you are installing several switches in a stack, proceed to “Connecting Stacking Cables” on page 2‐5. If the switch is being installed as a standalone switch, proceed to “Connecting AC Power” on page 2‐9 for power connection instructions.

  Policies and Procedures

Shipping Unless otherwise stated, we offer free domestic ground shipping on all orders. In addition to free domestic ground shipping, we also offer UPS Next Day Air Early AM, UPS Next Day Air, UPS 2nd Day Air, and UPS 3-day Select (if applicable). If you would like urgent shipping via any of the above expedited methods, please contact us at +86 18030177759 before purchasing.

For international shipping, please contact us for options and pricing before purchasing. We are happy to offer cash on delivery upon request using UPS, FedEx and DHL customer account numbers.

Returns All products ordered from Xiamen Xiongba will be backed by our 1 year warranty. Any item found to be defective due to normal use and wear within 1 year from date of receipt is covered under warranty.

Xiamen Xiongba reserves the right to provide a refund, repair or replace the same product within the warranty period. Xiamen Xiongba does not accept returns for wrongly ordered products. If you have any questions, please contact us.

Contact us Please call +86 18030177759 to contact us, or submit information through the website submission form. We look forward to hearing from you!

  Model recommendation:

ENTERASYS A2H124-24

Reviews

There are no reviews yet.

Be the first to review “ENTERASYS A4H254-8F8T P0973JP”

Your email address will not be published. Required fields are marked *