Description
1394-SJT05-E Technical Specification Manufacturer Rockwell Automation Brand Allen Bradley Part/Catalog Number 1394-SJT05-E Production Line Servo Controller Module Type System Rated Power 5 kW Input Phase Three Phase Factory Installation Option GMC-IMC S-Class GMC Option AxisLink and Remote I/O Input Voltage 360-480 AC Voltage Efficiency 98% Due to the diverse uses of the products described in this section, The personnel and equipment responsible for applying and using this control must be confident that all necessary steps have been taken to ensure that each application and use complies with all performance and safety requirements, including any applicable laws, regulations,
specifications, and standards. The examples, charts, sample programs, and layout examples displayed in this guide are for illustrative purposes only. Since then, Allen Bradley does not assume any responsibility (including intellectual property liability) for any specific installation related to many variables and requirements used based on the examples shown in this publication. Allen Bradley publication SGI-1.1 Application, Installation, and Maintenance of Solid State Controllers (available from your local Allen Bradley office) describes some solid-state devices and the products described in this publication when applied.
Reproduction of all or part of this copyrighted publication without written permission from Allen Bradley Company, Inc., Prohibited use. In this manual, we use annotations to remind you of safety precautions: the CNC interface system 1394 9/series CNC interface system (1394-SJTxx-E) provides a digital servo system that will be used for the 9/260 and 9/290 CNC systems. This system provides all power electronic devices and uses cost-effective digital interface methods. The servo control of this system is controlled by a 9/series CNC. The fiber optic I/O ring provides a complete interface between 1394 and the system and ODS, and uses ODS for programming (offline development system) and CNC operation panel.
Available options for Allen Bradley remote I/O, MMS/Ethernet (9/260 and 9/290 only), and Data Highway PlusTM (9/260 and 9/290 only) communication 9/series CNC interface systems. The shaft module is connected to the system module using sliding and locking, and the module to module connection. For information on motors and cables, refer to 1326.AB 460%, Torque Plus series, AC servo motor product data (publication 1326A-2.9), 13264S series 460V, low inertia, brushless servo motor product data (publication 1326A-2.10), and 1326 460V AC servo motor cable product data (publication 1326A-2.11). In addition to the above equipment, you also need to provide the following information: three-phase input contactors, three-phase input fuse system modules, and 24V AC or DC logic power supply enable for contactors (only for analog servo)/DRIVEOK power supply (for all modules). Please refer to Appendix A for information on these topics. Note: The external shunt resistor kit (1394-SR10A) can be used in 5 and 10kW systems, and its regenerative load exceeds the capacity of the internal 200W shunt resistor provided. A maximum of 5 and 10kW systems will not require a shunt resistor kit. All 22 products based on kW 1394 require external splitter modules (1394-SR9Ax or 1394-SR36Ax). This includes 1394 and 8520 directory items. System module system module with rated power of 5, 10, and 22 kW (at 460V), accommodating the system control PCB and converting 360 V AC to 480 V AC, three phase, 50/60Hz input power to 530-680V DC link voltage.
The 5 and 10kW system modules have an internal shunt resistor with a continuous rated power of 200W and a peak rated power of 40000W. The 22 kW system module requires an external splitter module. The 1394-SJT05-E system module is Allen Bradley’s unique CNC interface system, providing servo systems (digital) that can be connected to 9/260 and 9/290 CNC. 1394-SJT05-E transmits power and uses a digital interface to save time and cost. It is equipped with a fully interfaced fiber optic (I/O) ring. The 1394-SJT05-E system module can be fully programmed using the CNC operating panel and ODS (offline development system). 1394-SJT05-E is a system with GMC-IMC Class S, AxisLink, and remote I/O GMC options.
The rated input voltage of 1394-SJT05-E is 360-480V AC (three-phase, 50-60Hz), and the input current is 6.5A. Its peak current is 975A and its output voltage is 530 to 680V DC. The rated power of 1394-SJT05-E is approximately 4-5KW, with a peak of 28KW. It also has a unique operational efficiency of 99%. The output current of 1394-SJT05-E is 7.36A, with a maximum of 15A. The compatible housing temperature range of 1394-SJT05-E is 0-50 ° C (32-122 ° F), with a relative humidity of 5-95%, and no condensation. The impact level of 1394-SJT05-E is 15G, and the working vibration is 1G. The vibration of 1394-SJT05-E in standby mode is 2.5G, with a seismic rating of 30G. The inductance of 1394-SJT05-E is 1000 µ H, the capacitance is 220 µ F, and the weight is 11 kilograms (24.25 pounds).
Popular model recommendations:
Reviews
There are no reviews yet.