A-B 1394C-SJT22-C-RL

Sale!

A-B 1394C-SJT22-C-RL

¥5,687.00

Description

 

Allen Bradley servo controller 1394-SJT22-T-RL is a system with a rated power of 50-60 Hz, 10 kW, and an input voltage of 360-480 AC volts. 1326AB motors are a series of high-performance, medium inertia, ferrite, and three-phase servo motors with specially designed housings, They can reduce the motor length. They can provide 1394. It is a modular multi axis motion control and drive system family. Its unique design enables 1394 to be used as an integrated circuit motion controller and drive system (GMC). With Turbo or standard IMCTM S-class compact functions, it integrates 9/440 CNC system, 9/series CNC digital interface drive system, SERCOS servo drive system or analog servo drive system. All 1394 systems have 360 and 480V three-phase input power, efficient IGBT power conversion, sliding and locking, and module to module connection systems. Each system module can be configured with up to four axis modules, and each axis module interfaces with the motor. 1394 provides significant panel space and interconnect savings. Series annotation: The C series system module (catalog numbers 1394C-SJTxx-x) and axis module (catalog numbers 1394C AMxx and – AMxx IH), including functions, are not available on the A series and B series modules (catalog numbers 1394-SJTx-x and 1394 AMxx).

2.3 to 53.0 continuous torque ratings N-m (20.7 to 469.0 lb in.). Refer to I3264B 460V, Torque Plus Series AC Servo Motor Product Data (Publication 1326A-2.9) for more information on functions and options. The IP65 protection level is standard when used with the shaft oil seal kit. IP67 protection level is available (specify L in the catalog number, please refer to Appendix D). Figure 1.101326AB Motor 1326AS Motor This series of high-performance servo motors uses neodymium iron boron permanent magnet rotors, providing low inertia, high acceleration, and peak torque. They can be used for continuous rated torque ranging from 0.49 to 49.3 N-m (4.33 to 436 Ib in.). Refer to the 13264S series 460V, low inertia, brushless servo “Automotive Product Data” (publication 1326A-2.10) for more information on features and options. When in use, the standard protection level is IP65 with shaft oil seal. Control supports standard GMC (1394x-SJTx-C and – L) and GMCTurbo, CNC interface, SERCOS, and analog servo configurations with standard hardware arrays. Digital regulation of speed and current loop compensation

It can adapt to a wide range of system inertia. Two configurable analog test outputs that can be connected to key system parameters for troubleshooting (GMC and analog servo system modules). All systems provide digital fault and diagnostic utilities, including current monitors, thermal overload detection feedback signal monitors, and status indicators for the system and shaft modules. The status indicators for the sports board, Axislink, and RIO (GMC system) are limited to. Highly integrated surface mounted circuit encoder simulates encoder signal output (A QUAD B) (only for analog servo system modules). DSP assisted processing. Intelligent power control can be used for all 22 kW system modules and 5 and 10 kW system modules (C-series or higher), allowing power supply monitoring for process optimization. Intelligent power system module, suitable for all 22 kW system modules as well as 5 and 10 kW system modules (C-series or higher), including active soft start surge current limiting charging for DC links. GMC, GMC Turbo, SERCOS, and analog servo system modules (C-series or higher) and axis modules (C-series or higher).

  More model recommendations:

A-B 1394-SJT22-T-RL

Reviews

There are no reviews yet.

Be the first to review “A-B 1394C-SJT22-C-RL”

Your email address will not be published. Required fields are marked *