Description
Many products have not been listed yet. For more products, please contact us
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
Stressometer Flatness Control – the unsurpassed way to become more competitive
The Stressometer System is since more than 50 years recognized as the world standard in flatness measurement and control in flat rolling mills. Based on our experience from more than 1200 installations the Stressometer System provides the advanced automated control system needed to produce the high quality flat strip demanded by producers.https://www.weikunfadacai1.com/
Millmate Strip Scanner Systems – position and width measurement
One of the most important parameters to measure in a rolling mill are the position and the width of the strip. If these are accurately determined, the strip can be guided in a correct and consistent lateral position in the mill and the roll actuators can be adjusted to reach the target flatness. Furthermore, edge trimming can be reduced to a minimum, and strip breakage due to over-stressed edges can be eliminated. Millmate Strip Scanner system is widely used to measure strip edge position, off-center and strip width in rolling mills as well as in processing lines.https://www.weikunfadacai1.com/
Large PillowBlock Tensiometers – Strip tension measurement
One of the crucial parameters in achieving correct strip thickness during hot and cold rolling is the strip tension. In order to reach the highest possible accuracy, a strip tensiometer is the best and most reliable alternative. It keeps the strip tension constant within the desired range, during both acceleration and deceleration.
The Millmate Strip Tensiometer System consists of a Millmate Controller 400, a junction box and two load cells matched to the desired measuring range. The load cells are available for measurement in two different directions, one for vertical measurement and the other for horizontal measurement.
Millmate Roll Force Systems – Roll force measurement
A truly measured roll force is crucial in achieving correct roll gap settings, true force distribution from operator side to drive side of your mill and supervision of the backup bearings and roll eccentricity. The Millmate Roll Force System incorporates all three essential features. The Millmate Roll Force System consists of a Millmate Controller 400 and two load cells with matching units.
The various types and the wide load range of the Millmate Roll Force load cells cover practically all conceivable force measurement applications.
Millmate Strip Scanner systems in the cold rolling mills
The Millmate Strip Scanner system (MSS) is always working and the MSSsensors have been running perfectly for many years of operation. There is no maintenance and maintenance costs with MSS. MSS is very reliable as the sensor is unaffected by mill environment and the measurements are very stable. Coiler centering is very good with MSS. Also excellent recoiling without imperfections such as telescoping.
Large PillowBlock Tensiometers (LPBT) in the cold rolling mills
”Tension control is one of the most important process parameters in a process line. In order to achieve good tension control you need reliable input of the actual tension. Therefore the selection of reliable tension load cells is crucial. For Gränges the choice was ABB’s Large PillowBlock Tensiometers and the underlying Pressductor® technology. We appreciate the reliable and accurate measurements with ABB’s Large PillowBlock Tensiometers
Pressductor Radial Tensiometers (PRT) in the cold rolling mills and process lines
For measuring tension with shaftmounted load cells, PRT system is a highquality system that provides exceptional and long-lasting performance. PRT load cells and tension electronics are designed for medium-tension and light-tension process lines used in light gauge and loop slitters. Easy to install and virtually maintenancefree, PRT tension measurement makes a significant contribution to more productive operations and improvements in product quality.
Model recommendation:
admin –
One of the most important parameters to measure in a rolling mill are the position and the width of the strip. If these are accurately determined, the strip can be guided in a correct and consistent lateral position in the mill and the roll actuators can be adjusted to reach the target flatness. Furthermore, edge trimming can be reduced to a minimum, and strip breakage due to over-stressed edges can be eliminated. Millmate Strip Scanner system is widely used to measure strip edge position, off-center and strip width in rolling mills as well as in processing lines.https://www.weikunfadacai1.com/