Description

DS200FCRLG1AFC Technical Specification

Manufacturer General Electric

Series Mark V

Part number DS200FCRLG1AFC

Product Category Computer Board

Product Description

The GE ignition circuit control board DS200FCRLG1AFC has 27 bayonet connectors. It also comes with 27 jumpers, 1 34 pin connector, and 1 9 pin connector. The jumper configuration on the GE ignition circuit control board DS200FCRLG1AFC transmits the ignition signal from the connector. Therefore, they are important and you must consider them when replacing the circuit board. Each jumper can cover 2 out of 3 jumpers on the board. Jumpers can cover pins 1 and 2 or pins 2 and 3. The behavior of the circuit board will change depending on the pins covered.

 

 

When the circuit board leaves the factory, the packaging includes an installation guide that includes instructions for each jumper. It describes how the configuration changes if pins 1 and 2 are covered or pins 2 and 3 are covered. Jumpers are identified with two letter IDs on the circuit board, followed by a number. Some examples of jumper IDs are JP1, JP4, and JP9. The installation personnel will consult with engineers and operators to determine how to configure the drive to best meet on-site requirements. After configuration is completed, the drive will run as needed during normal processing.

 

 

The first step to replacing a drive is to check the jumper settings on the old board and move the jumper on the replacement board to match. Some jumpers will remain in their default position, which is the position of the jumpers at the factory. They are usually the most common settings. This board is just a component in a complex drive. Many components in the drive, including embedded electrical components, generate heat. In order for the circuit board to operate effectively and without errors, the driver must be installed in a position that is always cool or at room temperature. When selecting the installation location, please select a space for the drive, with a minimum distance of 18 inches between the drive and other devices. This will leave space for all devices to dissipate the heat they will generate. Please remember that the drive must have a continuous supply of cold air to circulate within it and keep the components below the thermal threshold to avoid automatic error messages or operational interruptions. If there are heating devices in the space, you may need to install a fan to help cool the drive. Ensure that sufficient fans are installed and that they are in good condition and reliable. If the component becomes too hot and the temperature rises above the threshold, overheating will occur, and the drive will shut down without human intervention. The overheating situation is recorded in the error log and included in the diagnostic tool report. Ensure that sufficient fans are installed and that they are in good condition and reliable. If the component becomes too hot and the temperature rises above the threshold, overheating will occur, and the drive will shut down without human intervention. The overheating situation is recorded in the error log and included in the diagnostic tool report. Ensure that sufficient fans are installed and that they are in good condition and reliable. If the component becomes too hot and the temperature rises above the threshold, overheating will occur, and the drive will shut down without human intervention. The overheating situation is recorded in the error log and included in the diagnostic tool report.

 

 

Frequently asked questions

Q: Are you a trading company or a manufacturer? Q: What is the payment method? PayPal?

A: We are a trading company. A: 100% T/T advance payment

Q: What is the HS product code? Q: Which countries or regions can be shipped?

A: Depends on the product. Answer: All over the world.

Q: How do you transport the goods? Q: How long is your delivery time?

A: Air freight. (DHL/TNT/UPS/FEDEX) A: If the goods are in stock, it usually takes 2-3 days. If

The product is out of stock and needs to be negotiated.

The basic principle of PLC selection is to choose the most reliable, convenient to maintain, and with the best performance.

The model with the best cost-effectiveness, provided that its functionality meets the requirements.

Generally speaking, when the process is relatively fixed and the environmental conditions are good,

It is recommended to use a single-chip structure PLC; In other cases, it is best to use a modular PLC structure.

Policies and Procedures

shipping

We offer free domestic ground shipping on all orders unless otherwise stated. In addition to free domestic ground shipping, we also offer UPS Next Day Air Early AM, UPS Next Day Air, UPS 2nd Day Air, and UPS 3-day Select (where applicable). If you would like urgent shipping via any of the above expedited methods, please contact us at +86 18030177759 before purchasing.

For international shipping, please contact us for options and pricing before purchasing. We are happy to offer cash on delivery upon request using UPS, FedEx and DHL customer account numbers.

return the goods

All products ordered from Xiamen Xiongba will come with our 1 year warranty. Any item found to be defective due to normal use and wear within 1 year from date of receipt is covered under warranty.

Xiamen Xiongba reserves the right to provide a refund, repair or replace the same product within the warranty period. Automation Industrial does not accept returns of incorrectly ordered products. If you have any questions, please contact us.

contact us

Please contact us at +86 18030177759 or submit your information via the website submission form. We look forward to hearing from you!

　　Recommended model;

GE DS200SDCCG1ACA