Description

DS200IQXSG1AAA Technical Specification

Manufacturer General Electric

Series Mark V

Part number DS200IQXSG1AAA

Product category PC board circuit protection card

　　Product Description

The GE inverter buffer board DS200IQXSG1AAA has 8 terminal connectors. Terminal markings are E1 to E8. The GE inverter buffer board DS200IQXSG1AAA also includes an 8-pin connector and a thin film capacitor installed on the board. This board is one of several boards installed in a single board cabinet. The size is 6.25 x 5 inches, and the four holes on the corners align with the matching mounting holes on the shelf. If no new screws are available, use the same screws that secure the old board.

 

 

Due to the heat generated by the moving components in the circuit board and driver, cooling is an important consideration when installing the driver. The drive must have a clean air source that can freely flow through the drive to maintain the components within the allowable temperature range. The design of the drive allows cool and clean air to enter the drive from the bottom and rise through the interior of the drive. It bypasses the components and absorbs heat from the drive.

Another consideration is that the driver should not be close to other devices that generate heat, and the walls around the driver will not be heated by devices on the other side of the wall.

If the drive becomes overheated and exceeds the temperature range, an overheating condition will be detected and the drive will automatically stop. This safety feature will prevent damage to components. It can also prevent fires from happening.

 

 

Common Questions about DS200IQXSG1AAA

How many pins are there in the terminal block of DS200IQXSG1AAA?

The DS200IQXSG1AAA has an 8-pin terminal block. However, the pins on the DS200IQXSG1AAA terminal block are separate. There is one pin on the far left of DS200IQXSG1AAA, five pins in the middle of the flat wire of DS200IQXSG1AAA, and two pins on the left side of the terminal block of DS200IQXSG1AAA.

What kind of battery does DS200IQXSG1AAA have?

 

 

DS200IQXSG1AAA has a WIMA FKP-1 0.22, 1250, 400~U battery. The battery on DS200IQXSG1AAA is light blue, and the battery on DS200IQXSG1AAA is labeled C5.

How is DS200IQXSG1AAA designed?

The DS200IQXSG1AAA is designed with two rectangular openings on both sides of the bottom of the DS200IQXSG1AAA, and two circular openings around the battery in the center of the top of the DS200IQXSG1AAA. This way, DS200IQXSG1AAA can work together with other boards and drives.

DS200IQXSG1AAA – INVERTER SNUBBER CAR is available in stock and will be shipped on the same day.

DS200IQXSG1AAA – The inverter buffer car is in an unused and rebuilt state.

To obtain the most favorable price for DS200IQXSG1AAA inverter shock absorption vehicle, please contact us and we will reply to you within 24 hours.

　　Recommended model:ICS TRIPLEX 9100 T9100@F2