Description

 

DS200KLDCG1AAA Technical Specification

Manufacturer General Electric

Series Mark V

Part number DS200KLDCG1AAA

Product category LED/buttons/display boards

Product Description

The GE key/LED/display board DS200KLDCG1AAA has 32 LEDs, 21 4-character displays, and one jumper. The GE Key/LED/Display Board DS200KLDCG1AAA also has a 40 pin connection strip on the back of the board. Jumpers on circuit boards are used to modify their behavior by changing their position on pins. For example, if the jumper covers pins 1 and 2, you can move the jumper to cover pins 2 and 3. The documentation accompanying the original circuit board describes how jumpers and moving jumpers change the behavior of the circuit board.

 

 

However, some jumpers are only for factory use and cannot be moved by service personnel. In this case, the jumper is used for testing during the manufacturing process and does not support the operation of the board with the jumper in the backup position. For detailed information, please refer to the information provided with the board.

The board is connected to the drive cabinet by inserting screws into the four holes in each corner. These holes align with the screw holes in the frequency converter cabinet frame. Before removing the defective circuit board, please note the installation position of the circuit board and the wiring method of the cables in the cabinet. Cable routing is important because if the signal cable is too close to the high-voltage cable, it can protect the driver from interference caused by high-voltage current. Cable routing also helps to maintain appropriate air flow. Improper cable routing may hinder airflow and cause component heating.

Common Questions about DS200KLDCG1AAA

 

 

How to identify the LED on DS200KLDCG1AAA?

There are a total of 32 LEDs on DS200KLDCG1AAA, and each LED on DS200KLDCG1AAA is identified by the naming convention DS1-DS32 on DS200KLDCG1AAA.

Are all components on each DS200KLDCG1AAA the same?

 

 

No, not every DS200KLDCG1AAA is the same. For example, some of our DS200KLDCG1AAA boards have connection strips produced in the Philippines, while our other DS200KLDCG1AAA boards have connection strips produced in Malaysia. However, regardless of the specific model of DS200KLDCG1AAA, DS200KLDCG1AAA always works in the same way.

How many wires are connected to DS200KLDCG1AAA?

Two wires are connected to DS200KLDCG1AAA through the part marked L1 on DS200KLDCG1AAA.

DS200KLDCG1AAA – GE display boards are available in stock and will be shipped on the same day.

The DS200KLDCG1AAA – GE display board is in an unused and rebuilt state.

Freight tools;

Unless otherwise specified, we provide free domestic land transportation services for all orders. In addition to free domestic land transportation, we also offer UPS Next Day Air Early AM, UPS Next Day Air, UPS 2nd Day Air, and UPS 3-day Select (if applicable). If you want to use any of the above expedited methods for emergency transportation, please contact us at (919) 372-8413 before purchasing.

For international transportation, please contact us for options and pricing before purchasing. We are happy to provide cash on delivery services using UPS, FedEx, and DHL customer accounts as requested.

Recommended model:A-B 2711P-RGT12SP