Description
Many products have not been listed yet. For more products, please contact us
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
The DS200TBQCG1AAA model is an Analog Input Milliamp Input/Output (I/O) Termination Module produced by General Electric for the Mark V DS200 Series. This model will connect to a TCQA board and will accept 20-200 mA outputs from the attached board.
DS200TBQCG1AAA Other names:
DS200TBQCG1AAA Input/Output Module
Analog module DS200TBQCG1AAA
DS200TBQCG1AAA communication module
Product Description
The GE RST Analog Termination Board DS200TBQCG1AAA features two terminal blocks. Each block contains eighty-three terminals for signal wires. The GE RST Analog Termination Board DS200TBQCG1AAA also contains 15 jumpers, three 40-pin connectors, and three 34-pin connectors. The jumpers enable the servicer to modify the behavior of the board to meet the exact requirements of the drive operation. When you first setup the board and have received the board from the factory, refer to the installation instructions which will include a description of the jumpers and how the position of the jumpers modifies the operation of the board. The jumpers are in the default position when you receive the board. The default is used for most situations and no additional steps are required if the default value is all you require.
Some jumpers on the DS200TBQCG1AAA unit are for use by the factory only and cannot be changed. Typically the alternate position is for use at the factory for quality control testing purposes only. When you replace the board, first move the jumpers on the replacement board to match the positions on the defective one.
Frequently Asked Questions about DS200TBQCG1AAA
What type of output signals does DS200TBQCG1AAA have?
The signals on the DS200TBQCG1AAA board are milliamp output signals. These signals will go to or come from the attached TCQA board in its respective core. The output type associated with this model and the TCQA boards is 20-200 mA outputs.
What are the input signals on DS200TBQCG1AAA?
The input signals for the DS200TBQCG1AAA board are the same as the output signals, which are milliamp signals. The milliamp signals that are available on this board are LVDT/R position inputs and 4-20 mA to the attached TCQA and its respective core.
What are jumpers BJ1 through BJ15 for on DS200TBQCG1AAA?
Jumpers BJ1 through BJ15 on DS200TBQCG1AAA are for connecting the milliamp input signals 1-15 on DS200TBQCG1AAA to DCOM.
Reviews For DS200TBQCG1AAA
While the DS200TBQCG1AAA model has five connection types, only two of the connections are used regularly. The regularly used connections are the JBR and JFR connectors; the JBR connection will write input signals and read output signals from the connected TCQA board. The JFR connection will write position input signals for the LVDT/R to the TCQA board within the respective cores.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
New for sale, please contact the website https://www.weikunfadacai1.com/ Customer service communication.
Model recommendation:
DS200TBQCG1A
DS200TBQCG1ABB
DS200DDTBG1A
DS200TCPSG1AEE
DS200TCQBG1BCB
DS200CDBAG1A
DS200SDCCG1ACA
DS200TCDAH1BHE
DS200TCQAG1BHF-W01 DS215TCQAG1BZZ01A
ASM1535-17254 DRILLING
PNCI STATENS-NO-93000254-B
Reviews
There are no reviews yet.