Description

 

DS215DMCBG1AZZ03A Technical Specifications　　ManufacturerGE General Electric　　SeriesMark V　　Part NumberDS215DMCBG1AZZ03A　　Product TypeDMCBG1 & FW

Product Description

DS215DMCBG1AZZ03A MK V GE Speedtronic Drive Board　　The DS215DMCBG1AZZ03A is a board component manufactured by GE for use within their MKV Speedtronic system. The MKV was designed for control of gas and steam turbine systems, and while MKV board components are no longer manufactured by the original manufacturer, they can be found here at AX Control as reconditioned and fully tested units. The DS215DMCBG1AZZ03A is a Drive board. It offers updated hardware and/or firmware as compared to a like-named DS200 board.

The DS215DMCBG1AZZ03A is a heavily populated board with the following specifications:

It has five vertical cable connectors. This includes four male and one female connector.

It has three vertical header connectors.

It has three stab-on connectors.

It has over twenty jumper switches.

It has a reset switch located in its upper left quadrant.

It has LED indicators.

It has an inductor coil.

It has TP test points for checking board voltages.

It has over fifty-five integrated circuits. This includes oscillating chips, field programmable gate arrays, and EPROM chips for the storage of data.

It has several fuse components.

It is populated by two auxiliary boards. This includes one vertically mounted board and one horizontally mounted board. Both boards are located in the bottom left corner.

The DS215DMCBG1AZZ03A uses resistor network arrays, transistors, and various capacitors, diodes, and resistors. The board is marked for alignment along two of its edges using lettering and alignment marks and notches. It is drilled in the board corners, in the center of the board, and has additional drill holes along the board edges.

For important information about handling and installation, please consult technical support products originally provided by General Electric. This includes manuals and data sheets.

DS215DMCBG1AZZ03A is a Drive Board and is part of the GE Speedtronic Mark V gas turbine control system. There are five vertical cable connectors on this densely packed board (four male and one female). There are also three vertical header connectors, three stab-on connectors, and over twenty jumper switches. In the upper left quadrant, there is a rese

FREQUENTLY ASKED QUESTIONS

How Many Vertical Cable Connectors are on this board?

It has five Vertical Cable Connectors, four male and one female.

How many Jumper Switches are on this board?

It has over twenty Jumper Switches on this circuit board.

　　Model recommendation:

GE DS200SDCCG1ACA