Description

 

Product Description

IS200HSLAH2ADE HS SLR LNK interface

IS200HSLAH2ADE is a circuit board component specifically manufactured for the Mark VI series. MKVI is one of the final systems used by General Electric to manage heavy-duty gas/steam turbine systems in the Speedtronic series. MKVI is a complete platform for protecting, controlling, and monitoring such turbine systems. MKVI is designed by GE as a modular, adaptable, and scalable system that can add or remove modules to meet the needs of corresponding turbines.

 

IS200HSLAH2ADE is an HS SLR LNK interface board. The board is filled on the surface of the top and bottom boards. This is a small board with a jack connector on its top surface. It has two transformers (Halo TG 110-EO 50N5), six inductance coils, multiple transistors, and many resistors, capacitors, and diodes. This board has over twenty integrated circuits, including a field programmable gate array at U1. There are additional connectors, resistors, transistors, and capacitors on the bottom.

IS200HSLAH2ADE has been drilled for installation. Most components are labeled with reference indicators for easy identification. Use technical support products such as datasheets and product manuals to obtain more information.

 

IS200HSLAH2A is a high-speed serial link interface board manufactured by General Electric for host application boards, and is part of the EX2100e regulator dual control system. The card is connected serially to EX2100e ERAX M1 and M2 to UCSB CPU M1 and M2. The top surface of the board has two jack inputs and outputs. They are placed side by side along a short edge of the board. This board has two Halo TG 110-EO 50N5 transformers. The circuit board consists of over 20 integrated circuits, including an FPGA (Field Programmable Gate Array) at U1. There are also two (female) connectors at the bottom of the board. The FA/00 code is written on the PCB. Multiple conductive sensors are integrated on the card.

 

 

Figure 1: Block diagram of EX2100e regulator dual control system

IS200HSLAH2A control software

The EX2100e control software has high performance, which helps customers and on-site engineers understand, install, debug, adjust, and maintain the excitation control system. Use the ToolboxST application to configure the exciter software and load it into the controller. On the ToolboxST component editor screen, the program is represented as a control block coupled together to describe the signal flow.

The output of the software sensor system includes the following:

1. Voltage of the generator

2. The current generated by the generator (average value in phase with watts)

3. Reactive current generated by the generator (average value in phase with reactive power, VAR)

4. Frequency (current) of the generator

5 Error (signal representing changes in rotor speed)

The sensor system uses the output to calculate the following:

1. Reactive power and generator power

2. Generator magnetic flux size (V/Hz)

3. Power factor and phase angle

Frequently asked questions

What is GE EX2100e IS200HSLAH2A?

IS200HSLAH2A is a host application board with a high-speed serial link interface.

What are the benefits of using a serial interface?

A serial interface is a communication interface that sends data in the form of a sequence of voltage pulses on the line between two digital systems.

How to check the price and supply status of the serial link interface board?

Please call+86 18030177759 to contact the Industrial Control Sales Consultant: Carrey for sales or to request a quote.

Model recommendation:

IS200EXHSG3AEC GE