Description
IS220PPROH1A – IO CARD MKVIE is available in stock which ships the same day.
IS220PPROH1A – IO CARD MKVIE comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS220PPROH1A – IO CARD MKVIE, contact us and we will get back to you within 24 hours.
IS220PPROH1A Other names:
Switch IS220PPROH1A
Control system module IS220PPROH1A
Editable controller IS220PPROH1A
Product Description
The IS220PPROH1A is a Turbine specific I/O module. It is designed to provide a direct interface to specific turbine field devices. This setup eliminates or reduces much of the previously needed instrumentation needed to make the connection to field devices, and also improves running reliability and reduces long term maintenance. The IS220PPROH1A typically works with the TREAH_A terminal board and is used in Aeroderivative Turbine Emergency trip applications. The component can connect to either barrier or box type terminal blocks. The IS220PPROH1A has field wiring restrictions for voltage sensing that limits cable length to 1,000 feet of 18 AWG wiring. It is important to note the IS220PPROH1A cannot be auto-reconfigured when swapping a BPPB P-Pack with a BPPC P-Pack.
The IS220PPROH1A is built with a front faceplate that is marked with the component id number and several LED indicators. These are placed on the front faceplate in pairs. The first pair is labeled PWR/ATTN, the second LINK/TxRx and ENET 1, and the third LINK/TxRx and ENET2. A final component is located at the bottom of the faceplate; this is labeled IR Port.
The IS220PPROH1A accepts three speed signals. This includes deceleration, acceleration, and overspeed. The component also has hardware implemented overspeed. The pack monitors the status and operation of selected trip boards through a set of comprehensive feedback signals. The pack supports TMR and simplex back up protection.
The IS220PPROH1A is built with a high speed processor and two fully independent 10/100 Ethernet ports. The pack has a hardware reset circuit and watchdog timer. Temperature is monitored by an internal sensor.
IS220PPROH1A is a Backup Turbine Protection (PPRO) I/O pack developed by GE. The Backup Turbine Protection (PPRO) I/O pack and associated terminal boards offer an independent backup Overspeed protection system, as well as a backup check for generator synchronization to a utility bus. They also serve as an independent watchdog for the primary control. Three triple modular redundant (TMR) PPRO I/O packs mounted to separate simplex protection (SPRO) terminal board or three PPROs put on a TMR TPROH#C terminal board constitute a typical protection system. Each SPRO or TPROH#C is connected to the designated emergency trip board through a cable with DC-37 pin connections on both ends:
TREG stands for Gas Turbine Emergency Trip Terminal Board.
TREL: Terminal Board for Large Steam Turbine Emergency Trips
TRES: Terminal Board for Small/Medium Steam Turbine Emergency Trips
A different configuration places three PPRO I/O packs directly on TREA for a single-board TMR protection system. For IONet communications with the control modules, the PPRO includes an Ethernet connection.
Functional Description
Two Ethernet ports, a power supply, a local processor, and a data acquisition board are included in the I/O pack. This design simplifies or eliminates much of the previously required instrumentation for connecting to field equipment, as well as improving operational reliability and lowering long-term maintenance costs.
The IS220PPROH1A is utilized in Aeroderivative Turbine Emergency Trip applications and is commonly used with the TREAH terminal board. The component can be connected to terminal blocks that are either barrier or box type. For voltage sensing, the part has field-wiring restrictions that limit cable length to 1,000 feet of 18 AWG wiring. When switching from a BPPB P-Pack to a BPPC P-Pack, the component cannot be auto-reconfigured.
The front faceplate of the part is marked with the component id number and many LED indications. These are arranged in pairs on the front faceplate. PWR/ATTN is the first pair, LINK/TxRx and ENET 1 is the second, and LINK/TxRx and ENET2 is the third. The final component is the IR port, which is placed at the bottom of the faceplate.
The part is equipped with a high-speed processor and two 10/100 Ethernet ports that are completely independent. A hardware reset circuit and a watchdog timer are included in the pack. An inbuilt sensor keeps track of the temperature.
Compatibility
The PPRO I/O pack comprises one of the compatible BPPx processor boards listed below:
The PPROH1A is equipped with a BPPB processor board.
The PPROS1B includes a functionally compatible BPPC processor board that is compatible with the ControlST software suite V04.07 and later.
Simplex Main Control
The Mark VIe control trip board TRES supports simplex backup protection.
The controller IONet has one PPRO network port.
All Mark VIe control backup trip boards, TREG, TREL, TREA, and TRES, feature TMR backup protection. Each I/O pack is connected to a distinct (R,S,T) controller network in this setup.
Triple Main Control
When using a TMR main control, backup protection is supported (two out of three running). This setup is supported by all Mark VIe control backup trip boards (TREG, TREL, TREA, and TRES). The first PPRO I/O pack is connected to the R network, the second PPRO to the S network, and the third PPRO to the T network in the standard network configuration.
Frequently Asked Questions
What is IS220PPROH1A?
IS220PPROH1A is a Backup Turbine Protection (PPRO) I/O pack developed by GE.
Is the component compatible with simplex and TMR systems?
Yes, the board is compatible with simplex and TMR systems.
Can IS220PPROH1A be auto-reconfigured when switching a BPPB P-Pack with a BPPC P-Pack?
When switching from a BPPB to a BPPC P-Pack it cannot be auto-configured.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
New for sale, please contact the website( https://www.weikunfadacai1.com/ )Customer service communication.
Model recommendation:
IS220YDIAS1B
IS220YDIAS1A
IS220PTURH1A
IS220PTCCH1A
IS220YAICS1AJA0C2S7
IS220YDIAS1AJA4F19X
IS220YDOAS1AJA1C10P
IS220PAICH1A 336A4940CSP3
IS220PAICH2A 336A4940CSP11
IS220PAOCH1A 363A4940CSP5
5SHY6545L0001
5SHY6545L0001
5SHY6545L0001
5SHY6545L000
AS RMP200-8 REV-2.1.0
CROATIA ITNL-3-24
Reviews
There are no reviews yet.