Description
Many products have not been listed yet. For more products, please contact us
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
MVR1600-4601 Other names:
Input/output module MVR1600-4601
MVR1600-4601 Analog Module
Controller Module MVR1600-4601
Introduction
MVR1600-4601-A is manufactured by Avid Controls under a license from General Electric
The rated voltage is 690 Vac and 1600 Adc (nominal).
Rectifier bridge module based on thyristors/diodes.
Air cooling.
• Protected pre charging circuit
2. Spare parts
The MVR1600-4601-A module does not contain user repairable components.
3. Related documents
Failure to comply with any general requirements for installation, operation, and maintenance, as provided in the technical manual, will significantly increase the risk of misoperation, fire, or electrical accidents
For instructions on removing and installing modules, as well as debugging drives, please refer to
The following general electrical manuals:
T1676EN, MV3000 AC Power Driver Beginner’s Guide
T1689, MV DELTA Technical Manual for MV3000 DELTA
T1679EN, MV3000 Driver Range Software Technical Manual
4. Fusing
The selection of fuses depends on many external factors, including current/time load conditions, number of starts per hour/day, fuse cooling, ambient temperature, continuous or intermittent operation, and fuse connection/installation arrangements.
The MVR1600-4601-A rectifier bridge module is a circuit module composed of four diodes, whose main function is to convert alternating current into direct current. In the rectifier bridge module, four diodes are connected in a specific way to change the direction of the current and convert the changing AC signal into a DC signal.
The working principle of the MVR1600-4601-A rectifier bridge module is based on the difference between the positive and negative biases of PN junction diodes. In a single PN junction diode, when P and N are reverse biased, almost no current flows through the PN junction; When they are positively biased, a large number of electrons will move from the N region to the P region, flow through the PN junction, and generate current. During each operation cycle of the rectifier bridge, only two diodes operate at the same time. Through the unidirectional conduction function of the diodes, AC power is converted into unidirectional DC pulsating voltage.
The MVR1600-4601-A rectifier bridge module is widely used in various power equipment, such as DC stabilized power supplies, electric drive equipment, and welding equipment. In these applications, the rectifier bridge module can convert the AC output of the transformer into stable DC power, providing the necessary power for the normal operation of the circuit.
In addition, the MVR1600-4601-A rectifier bridge module also has high efficiency, which can effectively convert electrical energy, reduce energy loss, and improve the energy utilization efficiency of the system.
The fuse information detailed here is intended to provide a basic fuse arrangement for individual units to operate at rated current and voltage, with an overload occurring every 10 minutes for 60 seconds, and a stop/start every day.
If larger cables or non SIWO-KUL cables need to be installed on the device, they will need to be connected to the customer’s connection. After installing the expansion bracket, the standard cover will not be suitable and additional covers will need to be installed. To provide additional protection, the cable is installed around the lower front crossbeam and connected to the DC customer.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new product and the price is not genuine,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
The new one is for sale, please contact customer service to communicate.
Model recommendation:
VMIVME-7614-132
VMIVME-7740-850
VMIVME-7740-850 350-007740-850 L
IC698RMX016-ED VMIVME-5567-100
VMIVME-5567-100
VMIVME-5530S
VMIVME-7645
VMIVME-7696-650
VMIVME-7658-330
VMIVME2170A 333-102170-000
More……
admin –
The selection of fuses depends on many external factors, including current/time load conditions, number of starts per hour/day, fuse cooling, ambient temperature, continuous or intermittent operation, and fuse connection/installation arrangements.
The MVR1600-4601-A rectifier bridge module is a circuit module composed of four diodes, whose main function is to convert alternating current into direct current. In the rectifier bridge module, four diodes are connected in a specific way to change the direction of the current and convert the changing AC signal into a DC signal.