Description

　Functional Characteristics Microprocessor: The VMICPCI-7806 is based on the Pentium M processor family. The enhanced Pentium M processor has 1 Mbyte of L2 cache while the Celeron M has 512 Kbyte of L2 cache. The Pentium/Celeron M processor family offers thermal characteristics that are well suited for embedded systems operating over a wide range of temperatures. DRAM Memory: The VMICPCI-7806 accepts one 200-pin SODIMM DDR module for memory configurations of 256 Mbyte, 512 Mbyte and 1 Gbyte.

BIOS: The VMICPCI-7806 System BIOS and video BIOS are provided in reprogrammable memory.

Video Graphic Controller: High-resolution graphics and multimedia-quality video are supported on the VMICPCI-7806 by an internal graphics controller. A fully functional, integrated 2D/3D graphics accelerator provides pixel processing and rendering, with display resolutions of up to 1600 x 1200 supported. The video output is provided through the CompactPCI connector. Support is provided for both analog and LVDS digital video. NOTE: Standard video BIOS support for LVDS is for an 800 x 600 panel only.(https://www.weikunfadacai1.com/)

 

 

If the VMIACC-0584 back panel is not used, then the video should be disabled via CMOS setup.

CompactFlash: The VMICPCI-7806 includes a CompactFlash socket on the assembly. The CompactFlash may be configured as the boot device through the BIOS boot device set up. See the CompactFlash ordering options for the available sizes.

IDE Interface: The VMICPCI-7806 provides an IDE interface for hard disk drive support. The IDE interface allows support of several types of data transfers: Programmed I/O (PIO), 8237 style DMA, Ultra ATA/33, Ultra ATA/66 and Ultra ATA/100. NOTE: Ultra DMA IDE modes require a high performance 80 conductor cable.

Ethernet Controller: The VMICPCI-7806 provides a dual connection for 10/100/1000BaseTX LAN using the Intel 82546EB Ethernet controller. Two standard RJ45 connectors are provided on the front panel with two network status indicators.

 

 

Both LAN ports supporting PICMG 2.16. Rev 1.0 are also available via the CompactPCI backplane.

Serial ATA: The VMICPCI-7806 provides a serial ATA interface via the CompactPCI backplane connector.

Remote Ethernet Booting: The VMICPCI-7806 utilizes an Expansion ROM BIOS which enables processor booting from a network server. The facility supports PXE and a variety of network boot protocols including BOOTP and DHCP (TCP/IP).

USB Ports: The VMICPCI-7806 provides two high speed universal serial bus (USB 2.0) ports. The ports are available on the CompactPCI backplane connectors.

Serial Ports: The VMICPCI-7806 provides two 16550-compatible serial ports. Each serial port has an independent 16-byte FIFO supporting baud rates up to 115 Kbaud. Connection for one serial port is provided by an RJ45 connector located on the front panel. Both serial ports are available via the CompactPCI connector.

　PMC Expansion Sites: The VMICPCI-7806 provides two individual IEEE 1386.1 PCI mezzanine card (PMC) expansion sites. This expansion capability allows the addition of peripherals offered for PMC applications. One PMC site is 3.3V 64-bit, 66 MHz, while the second site is 5.0V 32-bit, 33 MHz.

Keyboard and Mouse Ports: The VMICPCI-7806 supports a PS/2 keyboard and mouse through the CompactPCI connector using the optional VMIACC-0584 backplane adapter.

Hardware Reset: A hardware reset switch is accessible from the front panel.

Watchdog Timer: The VMICPCI-7806 provides a softwareprogrammable watchdog timer. The watchdog timer is enabled under software control. Once the timer is enabled, software must access the timer within the specified time period, or the output of the watchdog timer will either interrupt or reset the unit. The reset or interrupt operation is programmable.

　　VMICPCI-7806 Pentium®/Celeron® M Universal CompactPCI® Single Board Computer

Annunciators: Indicators for the primary IDE interface activity, board status, power good and a blue LED for hot swap are provided on the front panel. In addition, two indicators for the Ethernet adapter activity are located on each RJ45 network connector.

　Thermal Management: The VMICPCI-7806 utilizes a passive heat sink that relies on forced air cooling within the equipment rack at the specified flow rate. Please refer to the environmental specifications for more information.

CompactPCI Bus Bridge: The VMICPCI-7806 is a universal CompactPCI single board computer (SBC) supporting applications as both a system slot controller or a peripheral slot controller. The PCI-to-PCI bridge interface to the CompactPCI bus is automatically configured to operate as either a transparent or non-transparent bridge.

 

 

This implementation is fully compliant with PICMG 2.0 Rev 3.0, PICMG 2.1 Rev 2.0, and PCI-to-PCI Bridge Architecture Rev 1.1.

IPMI: The VMICPCI-7806 provides PICMG 2.9 Rev 1.5 IPMI support via the Zircon PM Peripheral Management Controller.

High Availability Hot Swap: The VMICPCI-7806 complies with PICMG 2.1 Rev 2.0 standard for CompactPCI hot swap. The VMICPCI-7806 complies with the high availability provisions of this standard. The processor may be removed and replaced while the system is operational. Processing can automatically be switched to a backup SBC that was previously installed in the system.

CMOS Battery:The VMICPCI-7806 uses a holder that permits field replacement of the CMOS battery. A header and jumper allows the battery to be disconnected from the circuitry for long-term storage.

Back Panel Configuration: The VMICPCI-7806 provides support for several peripherals using the CompactPCI backplane connectors. These signals are routed to the CompactPCI J3 and J5 connectors. This permits connection of the external IDE disk drive, floppy drive, USB, SATA, video, and keyboard and mouse via the VMIACC-0584 backplane adapter. Connection to these signals is provided to facilitate application development. NOTE: If the VMICPCI-7806 is not used with the VMIACC-0584 back plane adaptor, the user is responsible for either terminating video, SATA and USB or for disabling these features in the CMOS setup.

　　Operating System and Software Support The VMICPCI-7806 supports a variety of operating systems including Microsoft® Windows 2000, Windows XP, QNX, Linux and VxWorks. Physical/Environmental Specifications Dimensions: 6U (4HP) single slot Eurocard form factor Height 9.2 in. (233.4mm) Depth 6.3 in. (160mm) Thickness 0.8 in. (20.3mm)

Power Requirements: Low Power/Extended Temperature option Pentium M 1.4 GHz (1 Gbyte Memory) +5VDC (+5, -3 percent), 1.5A (typical), 3.5A (maximum) +3.3VDC (+5, -3 percent), 1.5A (typical), 1.8A (maximum) +12.0VDC (+5, -3 percent), 50 mA maximum -12VDC (+5, -3 percent), 50 mA maximum Pentium M Processor (1 Gbyte Memory) +5VDC (+5, -3 percent), 4.5A (typical), 6.75A maximum +3.3VDC (+5, -3 percent), 1.5A (typical), 2.0A maximum +12.0VDC (+5, -3 percent), 50mA maximum -12VDC (+5, -3 percent), 50mA maximum(https://www.weikunfadacai1.com/)

Airflow: Forced air cooling required, 400 LFM minimum, measured at the top (outlet) of the unit

Altitude: Operating, 0 – 10,000 ft (3,000 m) Storage, 0 – 40,000 ft (12,000 m)

Temperature: Operating, -0° C to +50° C Storage, -20° C to +70° C NOTE: The Pentium M processor will throttle when its junction temperature is between 90° C and 100° C. If application cannot take throttling of the CPU, then the thermal profile of the system must be verified to keep the CPU junction temperature less than 90°C.

Humidity: Operating, Relative Humidity 5% to 95%, noncondensing Storage, Relative Humidity 5% to 95%, noncondensing

Vibration: 6 Gs RMS (20 – 2000 Hz) random, .0185 G2 per Hz spectrum Shock: 10 Gs, 16 ms half sine, 6 axis, 10 pulses each MTBF: Total hours 246,953

　　Trademarks Intel and Pentium are registered trademarks of Intel Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. CompactPCI and PICMG are registered trademarks of PCI Industrial Computer Manufacturer’s Group. Other registered trademarks are the property of their respective owners.

Model recommendation:

VMIC320-250236 GE