Description

Tables 6-7. The technical specifications of IC693MDL645 have a rated voltage of 24 V DC and an input voltage range of 0 to+30 V DC. The input 16 of each module (shared by a group) is isolated between the field side and the logic side. The input voltage is 7 mA (typical value) at a rated voltage of 1500 volts. The input characteristic is on state voltage of 11.5 to 30 volts DC. The off state voltage is 0 to+5 volts DC. The on state voltage is minimum 3.2 mA. The off state current is maximum 1.1 mA. The response time is 7 milliseconds (typical value). The off response time is 7 milliseconds (typical value) Power consumption: 80 mA on the 5V backplane bus (all inputs open) Power consumption: 24V 125 mA from the isolated 24V backplane bus or from the user provided power supply product standards and general specifications, see Appendix B. 24V DC positive/negative logic input, 16 point IC 693 miles/hour 645 90-30 series programmable 24V DC positive/negative logic input module logic controller provides common power input terminals for 16 input points in a group. The input module is designed to have positive or negative logic characteristics. The input characteristics are compatible with a wide range of user provided input devices, such as buttons, limit switches, and electronic proximity switches. The current at the input point generates logic 1 in the input status table (% I). The power supply for operating on-site equipment can be provided by the user, or the isolated+24 VDC power supply (+24V OUT and 0V OUT terminals) on the power supply can supply a limited number of inputs. The LED indicator light providing the ON/OFF status of each point is located in the unit. The LED block has two parallel water, and each row has eight green LEDs; Lines marked Al to 8 at the top (points 1 to 8) and bottom lines marked B1 to 8 (points 9 to 16). There is a plug-in between the inner and outer surfaces of the hinged door. This surface facing inside the module (when the hinge door is closed) has circuit wiring that can record information, information, and circuit identification information on the external surface. The left outer edge of this insert is blue, indicating a low voltage module. This module can be installed in any IO slot of the 5 or 10 slot backplane in the 90-30 series PLC system. RX3i IO is designed specifically for critical task discrete and process applications. Rack based IO provides advanced diagnostics and excellent flexibility, with a wide range of standards and advanced IO.

Popular model recommendations:

IC693CPU363LT GE