Description

　　Technical specifications

Nominal rated voltage: 120/240 V AC or 125 V DC Input voltage range: 90 to 264 VAC or 100 to 150 VDC Input power: 90 watts output power at full load 56 watts Location on the motherboard: leftmost slot DC output:+5VDC up to 11 amps Part number: IC697PWR710 Description: Power supply 90-70 IC697PWR710120/240 VAC input,+5 VDC output, 55 watts. Fanuc 90-70 IC697PWR710 provides electronic short circuit overcurrent protection on the 5 volt bus. Weight: 4.00 pounds. IC697PWR748 is a 90W 48 VDC power module from GE Fanuc’s 90-70 series. It has three output voltages (up to 18 amperes at+5 VDC, up to 1.5 amperes at+12 VDC, and up to 1 ampere at -12 VDC), totaling 90 watts. This module has a sliding in rack mounting structure and two rack operations through a single power supply. This power supply is equipped with electronic short circuit overcurrent protection provided on the 5 volt bus.

The IC697PWR710-90-70 series 55W power module is available in stock and will be shipped on the same day. This special unit is inserted into a 48 pin backplane mounting connector (see the leftmost slot in the rack). It provides+5 V,+12 V, and -12 V power supplies. Sort the logic level signal to the backplane. The IC697PWR748 power module can be used for single rack applications, or if the user wishes, it can power a second rack. If choosing the latter, it is important that the total load is within the rated power range

The IC697PWR710-90-70 series 55W power module is in an unused and rebuilt state. For protection. The power supply is equipped with an electronic overvoltage protection circuit as standard. If the 5 V bus exceeds 6.7 volts, the circuit will clamp the output. External overvoltage on the output will not cause the power fuse to open, but if an internal fault in the power supply causes an overvoltage situation, the fuse may open. If the fuse needs to be replaced, it should be 5 amperes, 250 volts, and 5 × 20mm fuse.

IC697PWR710 is a 90-70 series 55 watt power module manufactured by GE Fanuc. The IC697PWR710 module is designed to operate at rated voltages of 120 VAC or 264 VAC. The power supply can accept an input voltage range of 90 to 264 VAC and 47 to 63 Hz. This power supply can also operate on a 125 VDC nominal line. The power supply includes an electronic overvoltage protection circuit. If the 5-volt bus exceeds 6.2 volts, the circuit will lock the output. The power fuse will not blow due to external overvoltage output, but if an internal fault in the power supply causes overvoltage, the fuse will blow. The fuse can be replaced with a 1 Amp 250V 5x20mm fuse.

The IC697PWR710 module is rack mounted and directly plugs into the 48 pin connector located in the leftmost slot of the rack. If the total load is within the rated power range, the power supply can be used for single rack applications or as a power supply for the second rack. There is a pre wired cable available for the interconnection of the second rack. There are four terminals on the input terminal board. The two top terminals (L1 and N) are connected to a 120/240 VAC or 125 VDC input power supply. The last two terminals are connected for overload device protection and grounding. The power input connection is designed specifically for AWG copper wire, size # 16. Terminals can use solid standard wires, but wires connected to any terminal should have the same type and size. For proper grounding, it is recommended to use AWG # 12 copper wire to connect the grounding terminal on the power supply to the GND terminal located on the rack.

To obtain the most favorable price for the IC697PWR710-90-70 series 55W power module, please contact us and we will reply to you within 24 hours.
Popular models:

IC697ACC720 GE