Description

Product Description

IC698ETM001 is an Ethernet interface module manufactured by GE Fanuc, which can provide high-performance Ethernet communication for the RX7i control system. It has an Ethernet processing speed of 200 MHz. The working voltage of the power supply is+5 VDC, and the maximum current consumption is 1.5 (+5 VDC). IC698ETM001 also provides TCP/IP communication with other GE intelligent platform control systems and hosts, as well as software for Ethernet communication with GE intelligent platform controllers.

 

 

The selected features of IC698ETM001 include providing complete configuration and programming services, as well as intermittent data exchange through Ethernet Global Data (EGD). This module provides EGD Class 2 functions or commands, as well as reliable data services (RDS) to ensure correct communication of command messages. This module is equipped with comprehensive station management, diagnostic tools, and extended connections. Due to internal network switches, full duplex ports provide automatically negotiated network speed and cross detection.

 

 

The redundant IP addresses of the IC698ETM001 module allow for the allocation of a single IP address to two Ethernet modules in two different controllers. In addition to the original IP address of each interface, this address is also configured. The Ethernet interface of the main unit is the only interface that can use redundant IPs. Note: The user must confirm that the gateway IP address has been configured.

Flash the storage protocol in the Ethernet interface, and use the CPU serial port for easy upgrade. Communication with remote controllers and other nodes can be achieved through routers. This module is equipped with status LEDs to assist in operation and troubleshooting.

The IC698ETM001 Ethernet interface module belongs to the GE Fanuc Versamax product series. It can provide efficient and high-performance Ethernet communication facilities for the RX7i series control system. Some important features of this module include TCP/IP communication services, SRTP client support, extended connections to IEEE and Ethernet LAN ports, programming and configuration services, regular data exchange, and EGD Class 2 functional ratings. The IC698ETM001 Ethernet interface module comes with 5 LED indicators to indicate the operation and communication status of the module. The communication protocol of the Ethernet interface module is stored in flash memory and can be upgraded through the CPU serial port.

 

 

The IC698ETM001 Ethernet interface module comes with a 200 MHz Ethernet processor speed. Its rated working voltage is 5 volts DC and the current consumption is 1.5 amperes. This module provides comprehensive site management and diagnostic tools to enhance performance and simplify troubleshooting. Its duplex mode, network speed, and cross detection functions are handled by two full duplex RJ-45 connectors. The installation method of the module is rack mounted. It allows for daisy chain connection of Ethernet nodes. The operating temperature range of the IC698ETM001 module is 0 to 60 degrees Celsius. It has 2 automatic sensing shielded Ethernet ports with 8-pin female RJ-45 connectors. This module can be directly connected to the Base T twisted pair network hub without the need for external transceivers. It establishes communication with nodes and remote controllers through routers. The approximate weight of the equipment is 0.34 kilograms.

Recommended model:A-B 2711P-RGT15