IC698PSA350C GE PACSystems power module

Sale!

IC698PSA350C GE PACSystems power module

¥4,454.00

Description


     Many products have not yet been launched, please contact us for more products

  If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

  We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.


  IC698PSA350 Other names:

Voltage controller IC698PSA350

IC698PSA350 communication module

PLC power supply IC698PSA350

  Technical specifications

Nominal rated voltage: 120/240 VAC or 125 VDC

Input voltage range: 85 to 264 VAC or 100 to 150 VDC

Input power: 437 watts

Output voltage:+5 VDC,+12 VDC, or -12 VDC

Module Type: Power Supply

Rack position: Slot 0 (leftmost slot)

IC698PSA350 is a PACSystems power module produced by GE Fanuc for the RX7i series. This module provides+5 VDC,+12 VDC, and -12 VDC power supplies. In addition, it also sends logic level sorting signals to modules on the backplane. This module is inserted into slot 0 of the mainframe.

The power output of IC698PSA350 module may lose one AC input line cycle while maintaining output power. In addition to electronic short-circuit protection, it also provides overcurrent and overvoltage fault protection. This module allows for a total output power of 100 watts at ambient temperatures ranging from 0 to 60 º C without the need for forced air cooling.IC698PSA350D

The output voltage is as follows:+5 VDC output to 60 amperes,+12 VDC output to 12 amperes, and -12 VDC output to 4 amperes.

More notable features of the IC698PSA350 module include the ability to operate at 85 to 264 VAC or 100 to 150 VDC. This module is equipped with AC power factor correction and a rack mounting structure that is easy to slide in.

There is a dual position on/off logic level switch on the front panel. It can enable or disable output channels without interfering with AC line inputs. Important warning: When the input power is present, there is a lethal voltage in the module.

The green LED indicator on the IC698PSA350 module is used to monitor the status of the field and output. When the power supply is within an acceptable range and the DC output channel is operating normally, these indicator lights will light up. If the critical power temperature is too high or there is an issue with the airflow, the module’s unique red LED will alert the user.IC698PSA350D(2)

The GE Fanuc IC698PSA350 power module is a DC power module designed specifically for the GE enhanced RX7i PACSystems series control systems. This power module provides+5V DC,+12V DC, and -12V DC power and logic level signals for devices and I/O connected to the RX7i backplane. The IC698PSA350 power module, like each RX7i series module, adopts a modular design that can perfectly slide into slot 0 of the RX7i system mainframe. The IC698PSA350 power module is designed to maintain output power through power loss of up to one cycle of AC input line, and is equipped with built-in overcurrent, overvoltage, and electronic short circuit protection. The IC698PSA350 power module supports both AC and DC inputs and has power factor correction function for AC operation.

The rated input voltage of the IC698PSA350 power module is 120/240 volts AC or 125 volts DC, and the acceptable input range is 85 to 264 volts AC (47 to 63 hertz) or 100 to 150 volts DC. Its rated output power is 350 watts at 60 degrees Celsius, and the maximum output value can reach up to 500 watts. The maximum surge rating of the IC698PSA350 power module is 30 amperes at 115 volts AC (cold start) and 60 amperes at 230 volts AC (cold start), with a duration of 100 milliseconds. The power factor value of the IC698PSA350 power module is 0.99, which is only effective when the AC voltage is between 90 and 260 volts. The isolation rating between the input and all outputs can reach up to 1500 volts AC voltage for a duration of 1 minute. Its overvoltage output is limited to a DC voltage of 5.7 to 6.7 volts, and its overcurrent is limited to 66 amperes when the DC voltage is+5 volts.


All products on this website are special products, and market prices have been fluctuating,

Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

The new one is for sale, please contact customer service for further communication.


Related product recommendations:
IC697CBL700
IC693CPU363LT
IC693CPU372-AE
IC690RFH008
IC693ACC323B
IC693ALG221
IC693APU300K
IC693APU301
IC693CHS391
IC693CHS392
more……

Reviews

There are no reviews yet.

Be the first to review “IC698PSA350C GE PACSystems power module”

Your email address will not be published. Required fields are marked *