IS200WREAH1A-PROTECTION I/O MODULE-IS200WREAH1A

Sale!

IS200WREAH1A-PROTECTION I/O MODULE-IS200WREAH1A

¥952.00

Description


  IS200WREAH1A IO CARD MKVIE is available in stock which ships the same day

  IS200WREAH1A IO CARD MKVIE comes in UNUSED as well as REBUILT condition

  To offer our best deals for IS200WREAH1AIO CARD MKVIE, contact us and we will get back to you within 24 hours.


  IS200WREAH1A Other names:

Gas turbine module IS200WREAH1A

IS200WREAH1A Input/Output Module

Controller module IS200WREAH1A

IS200WREAH1A Analog Controller


  Product Description

IS200WREAH1A is a turbine specific I/O module. It aims to provide direct interfaces for specific turbine field equipment. This setting eliminates or reduces many previously required instruments for connecting to on-site equipment, while also improving operational reliability and reducing long-term maintenance. IS200WREAH1A is typically used in conjunction with TREAH-A terminal blocks for emergency trip applications in aviation derived turbines. This component can be connected to barriers or box terminal blocks. IS200WREAH1A  has voltage sensing field wiring limitations, limiting cable length to 1000 feet for 18 AWG wiring. It should be noted that IS200WREAH1A cannot be automatically reconfigured when exchanging BPPB P-Pack with BPPC P-Pack.IS220PSVOH1B(1)

IS200WREAH1A is equipped with a front panel that is labeled with component ID numbers and multiple LED indicator lights. These indicator lights are placed in pairs on the front panel. The first pair is marked as PWR/ATTN, the second pair is marked as LINK/TxRx and ENET 1, and the third pair is marked as LINK/TxRx and ENET2. The last component is located at the bottom of the panel; Mark as IR port.

IS200WREAH1A receives three speed signals. This includes deceleration, acceleration, and speeding. This component also has hardware implemented overspeed function. This component monitors the status and operation of the selected trip board through a set of comprehensive feedback signals. This component supports TMR and simplex backup protection.IS220PSVOH1B

IS200WREAH1A is equipped with a high-speed processor and two completely independent 10/100 Ethernet ports. This component has a hardware reset circuit and a watchdog timer. The temperature is monitored by internal sensors.

IS200WREAH1A is a backup turbine protection (PPRO) I/O package developed by GE. The backup turbine protection (PPRO) I/O package and related terminal boards provide an independent backup overspeed protection system, as well as backup checks for synchronization between the generator and the common bus. They also serve as independent watchdog for main control. Three Triple Modular Redundant (TMR) PPRO I/O packages installed on separate Simplex Protection (SPRO) terminal blocks or three PPROs installed on TMR TPROH # C terminal blocks form a typical protection system. Each SPRO or TPROH # C is connected to the designated emergency trip board through a cable with DC-37 pin connections at both ends:

TREG represents the emergency trip terminal block for gas turbines.

TREL: Emergency Trip Terminal Block for Large Steam Turbines

TRES: Emergency trip terminal block for small and medium-sized steam turbines

Different configurations place three PPRO I/O packages directly on TREA for single board TMR protection systems. In order to communicate with the control module through IONet, PPRO includes an Ethernet connection.


  Function Description

The I/O package contains two Ethernet ports, a power supply, a local processor, and a data acquisition board. This design simplifies or eliminates most of the instruments previously required to connect on-site equipment, while improving operational reliability and reducing long-term maintenance costs.

IS200WREAH1A is used in aviation derived turbine emergency trip applications and is typically used in conjunction with TREAH terminal blocks. This component can be connected to barrier type or box type terminal blocks. For voltage sensing, this component has on-site wiring limitations, limiting cable length to 1000 feet for 18 AWG wiring. When switching from BPPB P-Pack to BPPC P-Pack, the component cannot be automatically reconfigured.IS220PSVOH1B(2)

The front panel of this component is marked with the component ID number and many LED indicator lights. They are arranged in pairs on the front panel. PWR/ATTN is the first pair, LINK/TxRx and ENET2 are the second pair, and LINK/TxRx and ENET2 are the third pair. The last component is the IR port, located at the bottom of the panel.

This component is equipped with a high-speed processor and two completely independent 10/100 Ethernet ports. The kit also includes a hardware reset circuit and a watchdog timer. Built in sensors can track temperature.

Compatibility

  The PPRO I/O package includes one of the following compatible BPPx processor boards:

PPROH1A is equipped with a BPPB processor board.

PPROS1B includes a BPPC processor board that is compatible with the ControlST software suite V04.07 and higher.

  Simplex control

The Mark VIe control trip board TRES supports simplex backup protection.

The controller IONet has a PPRO network port.

All Mark VIe control backup trip boards, TREG, TREL, TREA, and TRES have TMR backup protection function. In this setup, each I/O packet is connected to a different (R, S, T) controller network.

  Triple control

When using TMR main control, backup protection (two out of three operation) is supported. All Mark VIe control backup trip boards (TREG, TREL, TREA, and TRES) support this setting. In standard network configuration, the first PPRO I/O packet is connected to the R network, the second PPRO is connected to the S network, and the third PPRO is connected to the T network.


  Frequently asked questions

  What is IS200WREAH1A?

IS200WREAH1A is a backup turbine protection (PPRO) I/O package developed by GE.

  Is this component compatible with simplex and TMR systems?

Yes, the board is compatible with both simplex and TMR systems.

  Can IS200WREAH1A automatically reconfigure when switching from BPPB P-Pack to BPPC P-Pack?

Unable to automatically configure when switching from BPPB to BPPC P-Pack.

  How to obtain the IS200WREAH1A component?

Please contact the Industrial Control Sales Consultant: Carrey to understand the IS200WREAH1A wiring board or other turbine control requirements.


Discounted product recommendations:
IS220PHRAH1B
IS200SHRAH2A
IS200SHRAH1A
IS220PHRAH1A
IS201TRLYH2F
IS201TRLYH1F
IS201TRLYH3E
IS201TRLYH2E
IS221PDOAH1B
IS200SRLYH2A
IS220PDIAH1A
IS220PCNOH1B
More……

Reviews

There are no reviews yet.

Be the first to review “IS200WREAH1A-PROTECTION I/O MODULE-IS200WREAH1A”

Your email address will not be published. Required fields are marked *