Description
IS220PDOAH1A – Discrete Output Pack is available in stock which ships the same day.
IS220PDOAH1A – Discrete Output Pack comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS220PDOAH1A – Discrete Output Pack, contact us and we will get back to you within 24 hours.
Pack IS220PDOAH1A is labeled as a Discrete Output Pack. Its main function is to provide electrical interfaces between up to two input-output Ethernet networks as well as a discrete output terminal board. The PDOA pack can potentially control up to twelve relays plus accept terminal board-specific feedback.
IS220PDOAH1A 3364940CSP2 Other names:
Switch IS220PDOAH1A 3364940CSP2
Control system module IS220PDOAH1A 3364940CSP2
Editable controller IS220PDOAH1A 3364940CSP2
Product Description
Characterized as a Discrete Output Pack the IS220PDOAH1A model was designed with interfacing up to two I/O Ethernet networks and other discrete output terminal boards in mind. One special function of this model is that it can control up to twelve relays as well as accept feedback signals from other terminal boards. The typical relays that can be used with this model are solid-state relays and electromagnetic relays. The solid-state relays are used with the TRLYH1B, C, D, and F terminals whereas the electromagnetic relays are used with the TRLYH1E boards. The inputs that will be received on this pack with come through the double RJ45 Ethernet connectors as well as a three-pin power input.
There is a processor board embedded in the IS220PDOAH1A pack. There are multiple processors which include but are not limited to status-indicating LEDs, local power supplies for monitoring and sequencing, a high-speed processor which includes flash and RAM memory, and even more. All of the information on processors can be found in the GEH-721G Mark VIe Control System Guide, information can be found on pages two hundred and twenty-three to two hundred and thirty.
There is an output enable feature that is used with the IS220PDOAH1A pack. During the application in which power is given to the pack, all of the outputs will be disabled until a number of internal self-tests have been fulfilled. The enable function can provide paths that are independent of the command which will ensure that the relays are staying dropped out during the initialization and power-up of the pack.
IS220PDOAH1A is a Discrete Output Pack and is part of the GE Speedtronic Mark VIe gas turbine control system. It connects one or two I/O Ethernet networks to a discrete output terminal board via an electrical interface. The pack includes a processor board shared by all Mark VIe distributed I/O packs as well as an acquisition board dedicated to the discrete output function.
IS220PDOAH1A Functional Description
The pack can control up to 12 relays and accepts feedback from the terminal board. There are magnetic relays (TRLYH1B, C, D, and F terminal boards) and solid-state relays (TRLYH1E boards) available. The pack is powered by three-pin power input and two RJ45 Ethernet connectors. Output is via a DC-37 pin connector that is directly connected to the associated terminal board connector. Indicator LEDs provide visual diagnostics, and an infrared port allows for local diagnostic serial communications.
Compatibility
It works with six different types of discrete (relay) output terminal boards, including TRLY and SRLY boards, but not DIN-rail mounted DRLY boards. The number of I/O packs used in a signal path is referred to as the control mode:
Simplex employs a single I/O pack and one or two network connections.
Dual employs two I/O packs with one or two network interfaces.
TMR employs three I/O packs, each with one network connection.
IS220PDOAH1A Installation
Installing the PDOA pack:
Securely mount the terminal board of choice.
Insert one simplex PDOA I/O pack or three TMR PDOA I/O packs directly into the terminal board connectors.
Use the threaded studs next to the Ethernet ports to mechanically secure the packs. The studs fit into a terminal board-specific mounting bracket. The bracket should be positioned so that no right-angle force is applied to the DC37 connector between the pack and the terminal board. The adjustment should only be needed once during the product’s lifetime.
Depending on the system configuration, connect one or two Ethernet cables. The pack will work with either port. When using dual connections, it is common practice to connect ENET1 to the network associated with the R controller.
Connect the pack to power by plugging in the connector on the pack’s side. This connector does not need to be inserted with the power disconnected from the cable because the I/O pack has an inherent soft-start capability that controls current inrush on power application.
Configure the I/O pack as required.
IS220PDOAH1A Operation
Processor
The processor board is linked to an acquisition board that is dedicated to the I/O pack function. When input power is applied, the soft-start circuit increases the voltage available on the processor board. The local power supplies are turned on in sequence, and the processor reset is disabled. After completing self-test routines, the processor loads application code specific to the I/O pack type from flash memory.
The application code reads board ID information to ensure that the application code, acquisition board, and terminal board are all correctly matched. With a good match, the processor attempts to establish Ethernet communications, beginning with a network address request.
The address request employs the industry-standard dynamic host configuration protocol (DHCP) and the terminal board’s unique identification. Following Ethernet initialization, the processor programs the onboard logic executes the application, and allows the acquisition board to start up.
Relay Command Signals
The PDOA relay command signals are used as the first stage of signal conditioning and level shifting to connect terminal board outputs to control logic. Each output is an open collector transistor circuit with a current monitor that detects when the output is selected and connected to a load. When an output is picked up and connected to the terminal board, the status LEDs and monitor outputs illuminate. If the output is selected but no load is detected, the status LED will turn off and the monitor line will be false.
Output Enable
During power application, all outputs are disabled until a series of internal self-tests are completed. An enable line reflects the status of all required operating conditions. This function provides an independent path to ensure that relays remain dropped out during power-up and initialization.
IS220PDOAH1A Features
The number of relay channels in a single PDOA pack is 12 relays (different types depending on the terminal board)
15-pack inputs are monitored by a relay and a coil. The type of terminal board used, as determined by the ID chip, influences the selection of monitor feedbacks.
The I/O pack response time is approximately 6 ms from Ethernet command to output.
FREQUENTLY ASKED QUESTIONS
What is IS220PDOAH1A?
IS220PDOAH1A is a Discrete Output Pack and is part of the GE Speedtronic Mark VIe gas turbine control system.
What is the function of the module?
It connects one or two I/O Ethernet networks to a discrete output terminal board via an electrical interface
What is the IO pack response time of the component?
From Ethernet command to output is approximately in 6 ms.
How many relay channels are there in one PDOA pack?
There are 12 different relay types depending on the terminal board.
Reviews For IS220PDOAH1A
When using this model any/all of the visual diagnostics needed to determine the function of the PDOA pack will be located on the front of the device. If for any reason one of the LEDs does not work it will likely need to be replaced to ensure that everything is working properly.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
New for sale, please contact the website( https://www.weikunfadacai1.com/ )Customer service communication.
Model recommendation:
IS220PTURH1A GE
IS220PTCCH1A GE
IS220PAICH1A 336A4940CSP3 GE
IS220PAICH2A 336A4940CSP11 GE
IS220PAOCH1A 363A4940CSP5 GE
IS220PDIAH1A 336A4940CSP1 GE
IS220PDIAH1B 336A5026ADP4 GE
IS220PDIIH1B 336A5026ADP1 GE
IS220PDOAH1A 3364940CSP2 GE
IS220PPDAH1B 336A5026ADP14 GE
ABB UDD406A 3BHE041465P201
ABB 3BHE041465P201
BOXERS-R-AEC6900-0001-A1-CPU-CELERON-650-MHZ-512MB-RAM
A-B 1394C-SJT10-T-RL
A-B 1394C-SJT05-T-RL
ABB PE1315A
ABB PE1315A 5FSE707630-7
ABB 700-1921-S1140
AQUAMASTER-RAUMA PCI-01
ABB 3BSE007126R1-
ABB PFVI102
admin –
Characterized as a Discrete Output Pack the IS220PDOAH1A model was designed with interfacing up to two I/O Ethernet networks and other discrete output terminal boards in mind. One special function of this model is that it can control up to twelve relays as well as accept feedback signals from other terminal boards. The typical relays that can be used with this model are solid-state relays and electromagnetic relays.
angel –
GE 336A4940CSP2 | IS220PDOAH1A | Discrete output package. GE 336A4940CSP2, also known as IS220PDOAH1A, is a discrete output package. This package is designed to interface with up to two I/O Ethernet and other discrete output terminal boards.
A special feature of this model is that it can control up to 12 relays and receive feedback signals from other terminal boards. Typical relays that can be used with this model are solid-state relays and electromagnetic relays. Solid state relays are used with TRLYH1B, C, D, and F terminals, while electromagnetic relays are used with TRLYH1E boards.
The input received on this package will be through dual RJ45 Ethernet connectors and a three pin power input. A processor board is embedded in the IS220PDOAH1A package. The processor board includes multiple processors, including but not limited to status indicator LEDs, local power supply for monitoring and sorting, and high-speed processors including flash and RAM memory.
The IS220PDOAH1A package has an output enable function. During the application of powering the battery pack, all outputs will be disabled until some internal self checks are completed. Enabling the function can provide a path independent of commands, which will ensure that the relay remains disconnected during package initialization and power on.
IS220PDOAH1A is compatible with six discrete output terminal boards, including SRLY and TRLY. It has three connectors, one DC connector and two RJ45 connectors. The dimensions are 3.25 inches high x 1.65 inches wide x 4.78 inches deep. It has four LEDs: power, attention, TxRx, and link. It has a 28V input and 12 relay channels.