Description
IS220YSILS1B- IO PACK, TURBINE I/O PACK SIL in stock, shipped on the same day.
IS220YSILS1B- IO PACK, turbine I/O PACK SIL is in unused and rebuilt state.
To receive the best discounts on IS220YSILS1B- IO PACK, TURBINE I/O PACK SIL, please contact us and we will reply to you within 24 hours.
IS220YSILS1B Other names:
PCB module IS220YSILS1B
IS220YSILS1B Input/Output Module
Analog module IS220YSILS1B
Product Description
The IS220YSILS1B turbine input/output package is a turbine input/output package model similar to the PTUR turbine input/output package that sounds similar. It is manufactured by GE Energy, a General Electric shell company, and is used in conjunction with its Mark VIes series of wind turbine control automation products and product components. This IS220YSILS1B model is equipped with a special assembly version; The IS220YSILS1B functional product part number includes the IS220 initial series label, which can be seen from it. This IS220YSILS1B I/O package is described as a modified printed circuit board, modified by including individual functional revisions, rated as “A”. This A-level feature revision is a functional revision as it significantly improves the overall performance specifications and more powerful features of the IS220YSILS1B motherboard.
Hardware prompts and specifications
IS220YSILS1B has a total of three I/O packages that can be used in conjunction with a series of related terminal boards in the GE Energy Mark VIes series, including TTURS1C, TRPAS1A, TRPAS2A, TRPGS1B, and TRPGS2B terminal boards. For each individual compatible terminal board, IS220YSILS1B requires a different Mark VIeS safety I/O type. The TTURS1C terminal board has a safety I/O type for main turbine protection, while the TRPAS1A and TRPAS1A terminal boards provide different inputs; There are 4 speed inputs and 8 flame inputs, respectively. The TRPGS1B terminal board has three safety I/O types for monitoring trip relay outputs, and the final compatible TRPGS2B terminal board is aligned with one emergency stop in terms of safety I/O types. All these terminal boards and the larger IS220YSILS1B module are considered detachable, and the IS220YSILS1B I/O package has a box connector type for these terminal boards. The minimum power supply voltage for the input/output module abbreviated as YTUR is 27.4 V dc, and the nominal power supply voltage is 28.0 V dc. The maximum voltage of the IS220YSILS1B I/O package is relatively close to its nominal voltage, which is 28.6 V dc. The ambient temperature rating of this model is defined as -30 to 65 degrees Celsius in the instructions issued by the original factory.
Although many important information can be obtained from the instruction materials related to the IS220YSILS1B I/O package released by the original factory, other hardware and performance specifications can be collected by carefully and meticulously subdividing the part numbers of individual IS220YSILS1B series products. As mentioned above, the IS220 series label at the beginning of the IS220YSILS1B product number indicates that the I/O package has a special assembly style. This special assembly style is considered more unique than the IS215 special components, which are more common in the Mark VIe series. Starting from the initial series labels, the IS220YSILS1B part number includes part specific YTUR functional abbreviations, and then communicates its series grouping, conformal coating styles, and revision history to knowledgeable I/O package inspectors, all through the use of the “S1A” final product numbering section. For instructions on these IS220YSILS1B specifications, please use the IS220YSILS1B part number breakdown provided in the manual tab above.
Like any similar Mark VI Speedtronic series printed circuit board, this IS220YSILS1B model I/O trip pack comes standard with a series of hardware specifications that are particularly important for its overall functionality. This main I/O trip package has been approved for use in various hazardous locations; But it must be paired with the IS200TRPAS1A terminal board accessory for use. When using the IS200TRPAS1A terminal block assembly with the PTUR I/O trip package, it is necessary to remember a series of voltage specifications and best practices. Firstly, the IS200TRPAS1A terminal board has a voltage protection input, with a rated voltage of at least 16 V DC and a maximum voltage capacity of 140 V DC. The TRPA abbreviated terminal board for interface with IS220YSILS1B has an emergency stop input voltage range of 18 to 140 V dc and an additional speed input voltage range of -15 to 15 VDC.
Although the original instruction manual for IS220YSILS1B is indeed helpful in providing an overview of some compatible terminal boards corresponding to this Primary I/O Trip Pack, more information about IS220YSILS1B can be collected through a thorough visual inspection of the product and a complete part number breakdown of the IS220YSILS1B product number.
Firstly, a series of LED indicators immediately appeared on the front of the IS220YSILS1B I/O Trip Pack, all of which were printed with various factory labels, including Turbine I/O, K25, K25P, PWR, ENET1, ENET2 labels, and so on. This IS220PTURH1B product also has a separate port on the front, conveniently labeled as the “IR port”. Although the front of the product is crucial for diagnosing its functionality, the back of this PTUR abbreviation module also has other key hardware components; Includes dual Ethernet ports and two screw brackets for installation.
Although visual inspection of IS220YSILS1B can indeed reveal its basic functions, by subdividing the part numbers of individual IS220YSILS1B products, its series position and revision history can be revealed. The “I S220” label at the beginning of the IS220YSILS1B product number has a dual function; This product is defined as both a special assembly version and a domestically produced product produced by General Electric at its Salem factory in Virginia.
Frequently asked questions and answers about IS220YSILS1B
Where is the IS220YSILS1Bproduct manufactured?
IS220YSILS1Bis produced at General Electric’s factory in Salem, Virginia.
What type of PCB coating is used for the IS220YSILS1Bpackage?
The IS220YSILS1Bturbine input/output package comes standard with a special style PCB coating, as specified by the S1 series grouping label in the IS220YSILS1Bpart number.
What is the ambient temperature rating (in Fahrenheit) of the IS220YSILS1B battery pack?
The ambient temperature rating of the IS220YSILS1B battery pack is -22 to 149 degrees Fahrenheit.
Comment on IS220YSILS1B
The IS220YSILS1B printed circuit board is only intended for use in the Mark VIes series turbine control system components of General Electric Shell Company GE Energy, which are primarily designed for wind turbine control. This model (as indicated on the IS220 series label in the personalized IS220YSILS1B product number) has a special assembly version; Designated as a more advanced assembly than the typical IS215 assembly, this assembly features SCOM grounding wire and corresponding screws.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new product and the price is not genuine,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
The new one is for sale, please contact customer service to communicate.
Recommended gas turbine models:
IS400TBTCS1C
IS200TBTCS1C
IS200TBTCS1B
IS400STTCS2A
IS200STTCS2A
IS400STTCS1A
IS200STTCS1A
IS220YTCCS1A
IS200SPROS1A
IS220YPROS1A
DS215DMCBG1AZZ03B
More……
Reviews
There are no reviews yet.