Description
IS420ESWBH2A – Ethernet IONet Switch is available in stock which ships the same day.
IS420ESWBH2A – Ethernet IONet Switch comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS420ESWBH2A – Ethernet IONet Switch, contact us and we will get back to you within 24 hours.
Industrial Ethernet Switch IS420ESWBH2A is part of the Mark VIe Series designed by General Electric, this switch is equipped with two 100Base-FX multi-mode ports. The IS420ESWBH2A switch has RJ45 connectors which should have the capability to have up to two-hundred insertion/removal cycles.
IS420ESWBH2A Other names:
Controller module IS420ESWBH2A
Input/output module IS420ESWBH2A
Analog module IS420ESWBH2A
Product Description
The IS420ESWBH2A device is an unmanaged IONet/Industrial Ethernet switch designed by General Electric to be used in either Mark VIeS or Mark VIe Safety Control Systems. A key defining feature of the differences between the five ESWB switches is the number of fiber ports on the switch; this switch has two 100Base-FX multi-mode fiber ports, no matter what type of mode the fiber port has an LC-type connection. A special feature regarding the RJ45 connectors is that they have the ability to handle high amounts of stress and should be able to be used with up to two hundred insertion/removal cycles.https://www.weikunfadacai1.com/
The standard operation of the IS420ESWBH2A switch will operate centered on the ability to buffer streams of multicast and broadcast packets. There are multiple streams that will come into the switch and has enough space to buffer one packet per port, please note that multiple streams typically only allow buffering for one incoming stream and has to save the remaining streams for later transmission.
IS420ESWBH2A is an Ethernet IONet Switch manufactured by General Electric as part of the Mark VIe Series used in gas turbine control systems. All IONet switches utilized in a Mark VIe and Mark VIeS Safety control system must be from GE’s product line of industrial, unmanaged Ethernet 10/100 switches, specifically designed to satisfy the needs of real-time industrial control solutions.
IS420ESWBH2A Characteristics
The following characteristics are offered in order to satisfy the demands for speed and functionality:
802.3, 802.3u, and 802.3x compatibility
10/100 base copper with auto-negotiation
Full/half-duplex auto-negotiation
100 Mbps FX uplink port
HP-MDIX auto-sensing
LEDs to indicate the status of Link Presence, Activity and Duplex, and Speed per port (each LED has two colors)
LED to indicate power status
Minimum 256 KB buffer with 4 K media access control (MAC) addresses
Redundant power supply inputs (Diode-OR’d)
Functional Description
The GE Ethernet/IONet switches ESWB comes in five versions (H1A through H5A) that differ in the types of fiberoptic ports they can include, such as none, multi-mode, or single-mode (longer distance) ports.
Depending on the hardware form (ESWA or ESWB) and the chosen DIN-rail mounting orientation, the ESWx switches can be DIN-rail mounted using one of three GE-certified DIN-rail mounting clips. The following table outlines the separate ordering of the clips. With each switch are mounting screws.
An input voltage sag, also known as a brownout, may cause the ESWB I/O Network (IONet) switch to incorrectly reboot and fail to re-establish communication with the system under certain conditions. If the ESWB switch experiences a brownout condition that reduces the input 28 V line below the minimum operating voltage but not completely to 0 V, the switch may not correctly reboot when the input voltage returns to above the minimum operating voltage.
If this happens, the ESWB LEDs will either stay solid, flash in sync, or scroll from one side to the other, and the switch will not reconnect. If the site experiences a brownout, check the LEDs on the front of the switch after the voltage returns and the IONet loses communication. If they are solid, flashing in sync, or scrolling, manually reboot the switch by cycling power.
IS420ESWBH2A Features
Number of Ports: 16 ports, 10/100Base-TX copper, RJ-45
Power Requirements: 24 / 28 V dc, 1 A max
Power Supply Connector: Phoenix contact (MC 1.5/S-STF-3.81)
Dimensions (H x W x D): 18.8 x 8.6 x 5.6 cm (7.40 x 3.40 x 2.20 in)
Temperature: -40 to 70°C(-40 to 158°F)
Storage Temperature -40 to 85°C(-40 to 185°F)
Mounting Method: DIN-rail mounted with separately purchased mounting clip
When operating this switch the manuals used are the two volumes of the GEH-6855 manual as well as the GEH-6725 HazLoc manual, and the GEI-100869 Summary Sheet for the ESWB switch. Information can be found in chapter three of the second volume of the GEH-6855 manual.
IS420ESWBH2A Manuals, White Papers, Data Sheets, and Troubleshooting
GEH-6725 Mark VIe and Mark VIeS Controls Equipment HazLoc Manual IS420ESWBH2A.pdf
GEH-6855_Vol_I IS420ESWBH2A Mark VIeS Functional Safety Systems Vol I System Guide Manual.pdf
GEH-6855_Vol_II Mark VIeS Functional Safety Systems Manual IS420ESWBH2A.pdf
GEH-6861 Mark VIeS Functional Safety System Equipment in HazLoc IS420ESWBH2A.pdf
IS420ESWBH2A IONet Switches Data Sheet.pdf
Reviews For IS420ESWBH2A
The IS420ESWBH2A has the ability to be used with high speed and functionality, to achieve these functions a 100 Mbps FX uplink port and 10/100 base copper port with auto-negotiation are needed. More features needed to allow for high speed and functionality can be found in the many manuals attached to this page.
All products on this website are special products, and market prices have been fluctuating,
The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,
Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,
New for sale, please contact the website https://www.weikunfadacai1.com/ Customer service communication.
Model recommendation:
IS420UCSCH1B
IS420ESWBH3A
IS420UCSBH1A
IS420ESWBH3A-C
IS420YAICS1B
IS420UCSBS1A
IS420ESWBESWB
IS420UCSCH2A-E-V0.1-A
IS420UCSBH3A-UCSB
IS420UCSBS1A-UCSB
A100C08013.0100-0934 MOTHERBOARD
UTL-MB01-1154A MOTHERBOARD
7565-1 MOTHERBOARD
A100C08013.0100-0934 MOTHERBOARD
CMA-120 BASIC
admin –
The IS420ESWBH2A device is an unmanaged IONet/Industrial Ethernet switch designed by General Electric to be used in either Mark VIeS or Mark VIe Safety Control Systems. A key defining feature of the differences between the five ESWB switches is the number of fiber ports on the switch; this switch has two 100Base-FX multi-mode fiber ports, no matter what type of mode the fiber port has an LC-type connection. A special feature regarding the RJ45 connectors is that they have the ability to handle high amounts of stress and should be able to be used with up to two hundred insertion/removal cycles.https://www.weikunfadacai1.com/