Description

---

        Note that all products on this website are special products, and market prices have been fluctuating. Specifically

　　Based on the customer service quotation, as the product is new and the traps are not real,

　　Please confirm detailed information such as model, product, price, etc. with customer service before placing an order,

　　The website has been used and a new one is for sale. Please contact customer service to communicate.

---

          IS420PPNGH1A Other names:

　　IS420PPNGH1A editable controller

　　Industrial input and output module IS420PPNGH1A

　　Information module IS420PPNGH1A

---

Product Description

IS420PPNGH1A is a PROFINET gateway module device designed for installation into the Mark VIe system. Mark VIe is one of the final Speedtronic turbine control systems developed by General Electric. It is typically used in gas, hydraulic, and steam turbine systems.

IS420PPNGH1A is a powerful gateway that connects Mark VIe controllers to a PROFINET LAN. This enables high-speed communication between the controller and PROFINET I/O devices.

IS420PPNGH1A is a single module component designed for air cooling. It does not have a battery or fan installed. The equipment should be installed in an area where the fan is not blocked and the airflow is not obstructed. This model needs to be installed vertically on the panel.

It should be noted that the same switch cannot support both IONet and PROFINET. Each network must be connected to an independent switch. PPNG boards typically use ESWA 8-port unmanaged switches or ESWB 16-port unmanaged switches. The wiring length can be between three to eighteen feet.

IS420PPNGH1A is built on a 1066 MHz Intel processor (EP80579). It runs on the QNX Neutrino operating system and has 256 DDR2 SDRAM. You must use ControlST V05.04 or higher. The weight of this device is 2.4 pounds. The maximum PROFINET data rate that this model can use is 6 KB per millisecond.

For other important information on the use and limitations of IS420PPNGH1A, please refer to the GE manual and data sheet related to this device. This includes GEH-6721 VOL II.

---

Function description:

IS420PPNGH1A is a PROFINET controller gateway module manufactured and designed by General Electric, as part of the Mark VIe series used in GE distributed control systems. The PROFINET controller gateway module is a device or component used in industrial automation and control systems. PROFINET is a widely used industrial Ethernet communication protocol that allows different devices (such as programmable logic controllers (PLCs), sensors, and drivers) to communicate with each other within an industrial network. The role of the PROFINET controller gateway module is to serve as an interface between the PROFINET network and other communication protocols or systems. The following is a breakdown of its main functions:

PROFINET controller: This module acts as a PROFINET controller, which means it can establish connections and communicate with other PROFINET devices in the network. It can exchange data, control signals, and information with these devices.

Gateway: The term “gateway” means that the module can also convert or bridge communication between PROFINET networks and other networks or protocols. This is particularly useful in scenarios where different types of devices or systems need to exchange data but use different communication standards. The gateway module can facilitate this communication by converting data between two protocols.

Data Routing: This module can also provide routing functionality to ensure that data from a part of the PROFINET network can effectively reach its intended destination. It manages the routing of data packets to ensure correct communication flow within the network.

Data processing: In some cases, the gateway module may perform data processing tasks, such as filtering, data conversion, or data enrichment. This processing helps optimize data exchange between PROFINET networks and other systems.

---

Frequently asked questions:

What is the PROFINET controller gateway module?

The PROFINET controller gateway module is a device used in industrial automation to facilitate communication between PROFINET networks and other communication protocols or systems. It serves as a bridge that allows data exchange between devices using PROFINET and devices using different standards.

Why do I need a PROFINET controller gateway module?

You may need to integrate PROFINET based devices with other systems using different communication protocols. It ensures seamless data exchange and interoperability between various devices in industrial environments.

What types of devices can be connected using the PROFINET controller gateway module?

You can connect various industrial devices, including programmable logic controllers (PLCs), sensors, drivers, human-machine interfaces (HMI), etc., as long as they support their respective communication protocols.

---

Comment on IS420PPNGH1A

The IS420PPNGH1A module can be used with the UCSC controller to achieve communication interfaces. This module is equipped with a 106 MHz EP80579 Intel processor, which helps to implement the functionality of the PPNG model.

---

          All products on this website are special products, and market prices have been fluctuating,

　　The specific customer service quotation shall prevail, as the product is a new one and the traps are not real,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　New for sale, please contact website customer service https://www.weikunfadacai1.com/ Communication.

---

Model recommendation:
 IS420UCSCH1B
IS420ESWBH3A
IS420UCSBH1A
IS420ESWBH3A-
IS420YAICS1B
IS420UCSBS1A
IS420ESWBESWB
IS420UCSCH2A-E-V0.1-A
IS420UCSBH3A-UCSB
IS420UCSBS1A-UCSB