Description

---

　　 IS420UCSBS1A – UCSB CONTROLER MODULE (SAFETY) is available in stock which ships the same day.

　　IS420UCSBS1A – UCSB CONTROLER MODULE (SAFETY) comes in UNUSED as well as REBUILT condition.

　　To avail our best deals for IS420UCSBS1A – UCSB CONTROLER MODULE (SAFETY), contact us and we will get back to you within 24 hours.

---

　Mark VIeS Safety Controller IS420UCSBS1A is designed by General Electric with a 600 MHz EP80579 Intel Processor and can be used in hazardous locations. The IS420UCSBS1A controller is typically used for functional safety loops.

IS420UCSBS1A Other names:

IS420UCSBS1A editable controller

Industrial input and output module IS420UCSBS1A

Information module IS420UCSBS1A

---

Weight	Approximately 2 pounds	Series	Mark VIeS
Processor Type	600 MHz EP80579 Intel	Power Supply	Nominal 28 VDC
Part Number	IS420UCSBS1A	Controller Type	Mark VIeS Safety Controller

---

　　Product Description

The IS420UCSBS1A controller was designed by General Electric as part of the Mark VIeS Control Safety System. This controller is labeled as a Mark VIeS Safety Controller and has specific locations where it can be mounted; the standard mounting location for this controller is panel sheet mounting. This controller can be mounted in class one, zone two, group IIC with a UL E207685 certification; this is not the only location for this controller, and all other locations and certifications can be found in the GEH-6725 Mark VIe and Mark VIeS Controls Equipment HazLoc manual on page 112.

The IS420UCSBS1A controller is similar to the UCSC controller and has some of the same features and functions; some features that are available on the UCSB controller are no required jumper settings, flash memory that can be updated at the user’s convenience, and no fan. This controller has the ability to communicate with I/O modules through onboard input-output networks.

Before configuring the IS420UCSBS1A controller ensure that the controller has been properly added to the system with the correct redundancy, that the control system network cabling and hardware have been connected properly, and that all of the equipment in the system has been powered on successfully. While this controller is similar to the UCSC controller it is also identical to the IS420UCSBS1ABB controller in fit, form, and function.

All of the information needed regarding the IS420UCSBS1A controller can be found in several manuals produced by General Electric; the GEH-6855 Mark VIeS Functional Safety Systems Volume I System Guide, GEH-6725 Mark VIe and Mark VIeS Controls Equipment HazLoc Guide, and the GEH-6703 Toolbox ST User Guide for Mark Controls Platform User Guide are the best manuals to use when installing and operating this controller.

GE Speedtronic Mark VIe IS420UCSBS1A Controller. The UCSB controllers are stand-alone computers that run application-specific control system logic. Unlike traditional controllers where I/O is on a backplane, the IS420UCSBS1A controller does not host any application I/O. Also, all I/O networks are attached to each controller providing them with all input data. The hardware and software architecture guarantees that no single point of application input is lost if a controller is powered down for maintenance or repair. The controller operating system (OS) is QNX Neutrino, a real-time, multitasking OS designed for high-speed, high-reliability industrial applications.

The IS420UCSBS1A controller uses Internal Flash. The UCSB controller mounts in a panel and communicates with the I/O packs through on-board I/O network (IONet) interfaces. The I/O networks are private special-purpose Ethernet that supports only the I/O modules and the controllers.

The Mark VleS UCSBSlA Safety controller and Safety 1/0 modules are used for functional safety loops to achieve SIL 2 and 3 capabilities. Mark VleS Safety equipment is used by operators knowledgeable in safety-instrumented system (SIS) applications to reduce risk in critical safety functions. Safety controllers and distributed 1/0 modules are programmed specifically for safety control use, and this specific control hardware and software has IEC 61508 certification.

IS420UCSBS1A is available in New and Remanufactured Condition. IS420UCSBS1A functions as a Mark VIe/s Controller.

Remanufactured units are the circuit boards overhauled to their factory default. All the reman process is done by our experienced engineers in-house.

---

　　Reviews For IS420UCSBS1A

　　This controller is the final version of the UCSB controllers and is the only USCBS controller within the Mark VIeS system. This controller has a specific cable needed when connecting this controller with the UCSC controllers.

---

        Many products have not been listed yet. For more products, please contact us

　　If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse

　　We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

---

Model recommendation：
IS420UCSCH1B
IS200VSVOH1BDC
 IS200BPIAG1AEB
IS200VTCCH1CBB
IS420UCSCH2A-E-V0.1-A
 IS420PPNGH1A
IS420UCSCH2A
IS420UCECH1B
IS410JPDHG1A
IS420UCSC2A
STALECTRONIC 700-1921-S1140
3BSE007126R1
QDIO-16-16-0-5-213351120
C1CPU-4S-01-1131