Description

Call for Expedited Shipping and Product Condition Options

The VT 3002-1-2X-48F card holder is manufactured by Bosch Rexroth Indramat. This unit operates with a 4 A current carrying capacity, 48 VAC/DC terminal voltage, 48 pin socket connection type, and weighs 0.5 kg.

　　Product Description

The VT 3002-1-2X-48F is a Bosch card holder for electronics cards. Use of the card holder allows mounting of industrial electronics cards in control cabinets and other types of industrial enclosures. Card installation and wiring on the VT 3002-1-2X-48F is easy and simple. To install a card, operators simply need to push down on the yellow operating levers and the insert the card completely. To remove an installed card, operators need to unlock and withdraw the card after repeated actuation of the locking lever. To connect cables, operators need to remove the connection web between the two guide rails. External connections to the VT 3002-1-2X-48F are made via the 48-pin socket connector (form F). This connector features plug-in screw terminals with maximum 4 mm2 cross-section. The pin-out for the terminal strip is even-numbered, rows d/b/z.

The VT 3002-1-2X-48F can be fixed with screws or snapped to a hat rail. Diameter of the two screw holes on the device is 4.2 millimeters. With an additional adapter that is included in the supply scope, mounting on a hat rail is possible when the card holder is vertical. The VT 3002-1-2X-48F features a rugged base. According to VDE 0110C, the terminal maximum voltage for the VT 3002-1-2X-48F is 48 Volts DC. Current carrying capacity of the card holder is 4 Amps. Shipping weight of the device is 0.5 kilograms. The dimensions of the device are 140 x 63 x 220 millimeters. Only trained and qualified technical personnel with relevant experience should handle, install, maintain and service the VT 3002-1-2X-48F card holder and any card installed on it. Failure to follow recommended safety instructions can lead to equipment damage.VT-HNC100-1-23-W-08-0-0 by Rexroth, Indramat, Bosch in the VT-HNC100 Series. The VT-HNC100 Digital Axis Control is a programmable NC control for up to four controlled axes. It complies with the specific requirements for closed-loop control of hydraulic drives. This VT-HNC100-1-22-W-08-I-0 has 1 Hydraulic Axis, Housing for wall-mounting and 8 digital inputs/outputs. It also has a Component Series of 23 and has a Bu Connection of Without.

　　Model recommendation:

VT3000-3X REXROTH