Description

---

        9905-020 – Low Voltage 2301A Load Sharing & Speed Control is available in stock which ships the same day.

　　9905-020 – Low Voltage 2301A Load Sharing & Speed Control comes in UNUSED as well as REBUILT condition.

　　To avail our best deals for 9905-020 – Low Voltage 2301A Load Sharing & Speed Control, contact us and we will get back to you within 24 hours.

---

　　Woodward’s Part 9905-020 from 2301A Load Sharing and Speed Control Series. Powered by 20-40 Vdc input and is an individual actuator control.

---

　　Product Description

Xiamen Xiongba Industry provides the 2301A Woodward series 9905-020 controller. This device is a forward acting control, low-voltage model with a separate actuator and does not provide a deceleration ramp. The actuator current of this device is 0-200 mA. When supplying power to the controller, if the input power of the device is 20-40 Vdc, a Safety Ultra Low Voltage (SELV) power supply authorized by IEC standards must be used. The required operating temperature range for this model is -40 to+185 degrees Fahrenheit.（https://www.weikunfadacai1.com/）

On this 29 terminal model, when it comes to minimum fuel contact, control terminals 2 and 3 control the minimum fuel contact, which is required for the unit to operate as needed. The minimum fuel contact design is used for the normal shutdown of the prime mover connected to the equipment. Under no circumstances should minimum fuel contact be used as an emergency stop mechanism.

Due to the low voltage model of the 9905-020 control device, when connecting shields, terminal 17 must be opened to achieve minimum fuel contact, terminal 18 must be closed to ignore failed speed signals, and terminal 19 must be closed to obtain rated speed. If idle is used, please ensure that terminal 19 is open. When using the controller under any circumstances, it should not be installed on the engine of the prime mover.

---

　　When operating the controller, the model should not be used near any other high current devices, as this may cause interference and affect the quality and performance of the controller.

　　Comments for 9905-020

　　This control operates as a low-voltage model, which means the power supply is rated at 20-40 VDC and requires a power consumption of 48

---

　　Popular model recommendations:

WOODWARD 9905-003

New Metso Automation Valmet CPR1 Processor Module A413280 Model 16 CPR-1 Nib