Description
Many products have not been listed yet. For more products, please contact us
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
Model 9905-021 2301A Series Load Sharing and Speed Control. Load sharing input of 0-6 VDC, can be used with a steam turbine or gas engine.
The Woodward 2301A series 9905-021 controller is a reverse acting low-voltage model with an actuator current of 0-200 mA. This model is also a separate actuator model and does not provide a deceleration ramp. When connecting this device to a 20-40 Vdc power supply, use terminals 15 and 16, with the negative lead connected to terminal 15 and the positive lead connected to terminal 16.
Connect the load sharing line to terminals 10 and 11, and the load signal lead to terminals 11 and 12. The eleventh terminal is shared between load sharing and load signal functions. The eleventh terminal is a negative terminal connector, while terminals ten and twelve are positive connectors. The load sharing input for this model is specified as 0-6 Vdc.https://www.weikunfadacai1.com/
When connecting the shielding wire, it is necessary to remove the outer insulation layer from both ends of the shielding layer to expose the coil shielding layer; Do not cut the protective cover.
Before using the controller, it is recommended to visually inspect the model to ensure that the screws are intact, the terminals are not damaged or broken, and to inspect all dials to ensure that there is no damage or damage, as this may affect the performance unit.https://www.weikunfadacai1.com/
When installing the controller, be sure to prevent it from coming into contact with water or condensation. If the controller is damp, it may cause the model to malfunction and prevent it from executing.
Comments for 9905-021
This model can be used in conjunction with other Woodward electrical load sharing control devices. The load sharing input of this model is 0-6 Vdc. We tested the model before shipment and its performance exceeded expectations
Warehouse model recommendation:
Reviews
There are no reviews yet.