Description

EasyGen-1500 Technical Specifications

Discrete input range 12/24 VDC

Humidity 95%, non condensing

Maritime certification GL and LR

Working temperature -30 to 80 ° C

Energy consumption<. 15 watts

Power supply 12/24 VDC

Storage temperature -20 to 70 ° C

Product Description

EasyGen-1500 is one of several generator set controllers provided by Woodward in AX Control inventory. This control model is labeled with the EasyGen 1000 series manufactured by Woodward inc. It can be purchased through AX Control inc.’s extensive new inventory and second-hand refurbished inventory.

EasyGen-1500 is a small generator set control model that can be used for single machine operation. EasyGen-1500 is also marked with control part numbers 8440-1809 and 8440-1810. This device provides AMF/power loss and automatic start and stop. It has complete generator, engine, and power protection within the device. In addition, the device provides true current and power RMS sensing, as well as true RMS sensing using FlexRange.

EasyGen-1500 has eight user configurable discrete alarm inputs. It also has two configurable analog inputs and ten programmable relays. When operating EasyGen-1500, please ensure that you only use one generator when operating the controller, as it cannot be used with more than one generator. The model can also send start/stop messages and change the engine’s operating mode, such as changing the engine to droop mode.

EasyGen-1500 uses a 12/24 VDC power supply. It is designed for an ambient temperature of -20 to 70 degrees Celsius, where the ambient humidity must be 95% and non condensing. The size of the device is 192mm x 144mm x 62mm deep.

If you are interested in purchasing this control to meet any of your needs, you can contact our sales department by phone or email to inquire about the availability of the EasyGen-1500 model.

Comments from EasyGen-1500

Internal review

(5.0)

This control comes with AMF, power loss, and automatic start/stop sequence. This control can send start/stop messages and also change the operating mode of the control. Please refer to your manual and certified professionals during the operation process

The second generation generator set control aims to provide maximum flexibility through user-friendly and intuitive design, and to provide large graphical displays for various applications.

This controller is one of a series of powerful new generator set controllers (eaSYgen). This trendsetter technology provides maximum flexibility for every user. Product classification

The design of the second-generation generator set controller aims to provide maximum flexibility in user-friendly and intuitive design for various applications, and is equipped with a large graphical display. This controller is one of a series of new powerful generator set controllers (easYgen). This trend setting technology provides maximum flexibility for each user.

New technologies include:

FlexAppTM – This intelligent and flexible feature provides tools for easy configuration of multiple applications. Users can configure the easYgen-1000 series as

Measurement sensor/engine control [0-CB mode {0}]

Used for start/stop and measurement conversion

• 1-Circuit breaker control [GCB open, {1o}]

Above plus engine/generator protection

• 1-Circuit breaker control [GCB open/close, {1oc}]

Above plus backup power application

• 2-circuit breaker control [GCB/MCB open/close, {2oc}]

Add AMF and open conversion application above

DynamicsLCDTM – The soft keys provided by the graphical LCD vary depending on the application and operation.

FlexInTM – Two analog inputs can be freely configured by the user (applicable to each type of sensor), as follows:

VDO (0 to 180 ohms [0 to 5 bar/0 to 10 bar]; 0 to 380 ohms [40 to

120 ° C/50 to 150 ° C]; 0 to 180 ohms [0 to 100% level]; Isolation (2-

Pole) and non isolated (single pole) grounded transmitters

Resistance input (Pt100/linear 2 points/user-defined 9 points)

0/4 to 20 mA (linear 2 points/user-defined 9 points)

FlexCANTM – A flexible isolated CAN bus for multiple purposes. Can be selected during the configuration process: CANopen or CAN (CAL); Coupling of easYlite remote signal; Support for coupling third-party expansion cards (please request detailed information from our sales department). J1939 protocol for ECU coupling and alarm management, which can be remotely started/stopped through ECU (Scania, Volvo,

Deutz, mtu).

LogicsManagerTM – A large number of measured values, inputs, internal states, or constant values can be logically combined to operate relay contacts or internal functions.

FlexRangeTM – Real RMS 3-phase generator and power supply voltage, measured input:

O Rated 120 Vac (maximum 150 Vac) and

1 unit rated at 480 Vac (maximum 600 Vac)

Real RMS three-phase generator current/power

Real RMS 1-phase current input, selectable and freely configurable

O Mains current

O Ground current (ground fault protection)

• 1 speed input (magnetic/switch)

Up to 8 configurable discrete alarm inputs

LogicsManagerTM – Up to 9 programs. relay

• FlexInTM -2 configurable analog inputs

• FlexCANTM – CAN bus communication (32 participants, isolated)

Protection (ANSI #)

Generator/Engine: Battery voltage, overspeed (12), overvoltage/undervoltage (59/27), overfrequency/underfrequency (81O/U), overload (32), reverse/reduced power (32R/F), unbalanced load (46), timing overcurrent. (50/51), inverse time overcurrent (IEC255), calculation+measurement of ground fault

The new technologies included include:

Flexible applications

This intelligent and flexible feature provides tools for easy configuration of multiple applications. Users can configure the easYgen-1000 series as

Measurement sensor/engine control for start/stop [0-CB Mode {0}]

1-Circuit breaker control [GCB open, {1o}] plus engine/generator protection

1-breaker control [GCB open/close, {1oc}] plus backup power application

Add AMF and open transition applications above the 2-breaker control [GCB/MCB open/close, {2oc}]

FlexIn TM

Users can freely configure two analog inputs (applicable to each type of sensor):

VDO (0 to 180 ohms [0 to 5 bar/0 to 10 bar]; 0 to 380 ohms [40 to 120 ° C/50 to 150 ° C]; 0 to 180 ohms [0 to 100% level]; isolated (2-pole) and only non isolated (1-pole) grounded transmitters)

Resistance input (Pt100/linear 2 points/user-defined 9 points)

0/4 to 20 mA (linear 2 points/user-defined 9 points)

FlexCAN TM – A flexible isolated CAN bus for multiple purposes.

During configuration, you can choose between CANopen or CAN (CAL); Connect easYlite remote alarm; Supports coupling of third-party expansion cards.

The J1939 protocol for ECU coupling and alarm management can be used for remote start/stop (Scania, Volvo, Deutz, MTU) using the ECU.

Logical Manager

A large number of measured values, inputs, internal states, or constant values can be logically combined to operate relay contacts or internal functions.

Our customers are located in growth areas, so we are by their side – designing, manufacturing, and repairing products. We continue to expand in Germany, Poland, China, South Korea, India, and the Middle East. Our global business enables us to tailor solutions to customers’ local needs, enabling us to respond quickly. Careful consideration of environmental and cultural differences is key to making Woodward a global citizen.

The internal team is also composed of members from multiple locations – encouraging new ideas, providing various perspectives on how to respond to new challenges, and providing opportunities for members to have a global impact.
PROSOFT 6104-WA-PDPM